FYI FORD - MustangSteve's Ford Mustang Forum
The Internet's Most Knowledgeable Classic Mustang Information
IF YOU HAVE A QUESTION ABOUT CLASSIC FORD MUSTANGS, YOU HAVE COME TO THE RIGHT PLACE!
MustangSteve has over 30 years of Mustang experience, having owned 30 of them and restored several others. With the help of other Mustangers, this site is dedicated to helping anyone wanting to restore or modify their Mustang.... THERE ARE NO DUMB QUESTIONS!!!!!
Visit MustangSteve's web site to view some of my work and find details for:
FYIFORD Contributors' PICTURES - Power Brake Retrofit Kits for 65-66 Stangs - Classic Mustang FAQ's by MustangSteve - How to wire in a Duraspark Ignition - Mustang Ride Height Pictures and Descriptions - Steel Bushings to fit Granada Spindles to Mustang Tie Rods - Visit my EBAY store MustangSteve Performance - How to Install Granada Disc Brakes MustangSteve's Disc Brake Swap Page - FYIFORD Acronyms for guide to all the acronyms used on this page - FYIFORD Important information and upcoming events

You are not logged in. Would you like to login or register?

  • Index
  •  » FYI Ford, Classic Mustang Tech Discussion
  •  » Plug wires

    • 1 of 1

       

    5/19/2013 2:34 PM  #1

    Ernest
    FYI FORD Member

    Offline

    From: Fort Worth, TX
    Registered: 4/02/2013
    Posts: 72

    Plug wires

    I am installing a 351w in a 66 fastback and have an MSD dizzy and MSD 6al box. . Are 9mm plug wires good to get or are they too thick. On my previous mustang I had 8mm but is thicker better?  Here is what I'm looking at. 

    http://www.summitracing.com/parts/fms-m-12259-m301

     

    5/19/2013 5:45 PM  #2

    MS
    Forum Originator

    Offline

    From: Canyon Lake, Texas
    Registered: 1/24/2013
    Posts: 12,155

    Re: Plug wires

    You need the 135 degree boots, not the 90. Size of wire is up to you.

    Money you enjoy wasting is NOT wasted money... unless your wife finds out.
     

    5/19/2013 8:12 PM  #3

    Ernest
    FYI FORD Member

    Offline

    From: Fort Worth, TX
    Registered: 4/02/2013
    Posts: 72

    Re: Plug wires

    The link shows 45 degree boots. Just from a quick search people say 45 and 135 degree plug wires are the same. Is this true?

       •Thread Starter
     

     

    1 of 1

  • Index
  •  » FYI Ford, Classic Mustang Tech Discussion
  •  »  Plug wires

    • Board footera


    REMEMBER!!! When posting a question about your Mustang or other Ford on this forum, BE SURE to tell us what it is, what year, engine, etc so we have enough information to go on.