FYI FORD - MustangSteve's Ford Mustang Forum
The Internet's Most Knowledgeable Classic Mustang Information
IF YOU HAVE A QUESTION ABOUT CLASSIC FORD MUSTANGS, YOU HAVE COME TO THE RIGHT PLACE!
MustangSteve has over 30 years of Mustang experience, having owned 30 of them and restored several others. With the help of other Mustangers, this site is dedicated to helping anyone wanting to restore or modify their Mustang.... THERE ARE NO DUMB QUESTIONS!!!!!
Visit MustangSteve's web site to view some of my work and find details for:
FYIFORD Contributors' PICTURES - Power Brake Retrofit Kits for 65-66 Stangs - Classic Mustang FAQ's by MustangSteve - How to wire in a Duraspark Ignition - Mustang Ride Height Pictures and Descriptions - Steel Bushings to fit Granada Spindles to Mustang Tie Rods - Visit my EBAY store MustangSteve Performance - How to Install Granada Disc Brakes MustangSteve's Disc Brake Swap Page - FYIFORD Acronyms for guide to all the acronyms used on this page - FYIFORD Important information and upcoming events

You are not logged in. Would you like to login or register?

7/04/2015 7:42 AM  #1


For Sale - 2921 Edelbrock Victor Junior Intake Manifold w/ gasket sets

Manifold was bought for use on a 1968 Mustang A-sedan road race car that I vintage raced.  Rules changed making open plenum manifolds illegal, and I never used the manifold on the car.  Manifold was installed on the engine one time at Keith Craft's shop in Arkansas and has dyno time only - looks brand new.  Runners have been only lightly "cleaned up" and professionally port matched by the late Raymond Grice in Durant OK.  With this manifold on race gas only, the 303 CI engine made 547 hp and just shy of 400 lb-ft of torque on the dyno with a 750 Holley HP carb. Have six new sets of TFS intake gaskets that go with the deal.   In the original box...a deal at $275 since new 2921's now cost over $300 at Summit with no port work, and the gasket sets alone are worth $120.
Rusty
214-914-9342
 

Last edited by 68asedan (7/05/2015 5:01 AM)

 

Board footera


REMEMBER!!! When posting a question about your Mustang or other Ford on this forum, BE SURE to tell us what it is, what year, engine, etc so we have enough information to go on.