FYI FORD - MustangSteve's Ford Mustang Forum
The Internet's Most Knowledgeable Classic Mustang Information
IF YOU HAVE A QUESTION ABOUT CLASSIC FORD MUSTANGS, YOU HAVE COME TO THE RIGHT PLACE!
MustangSteve has over 30 years of Mustang experience, having owned 30 of them and restored several others. With the help of other Mustangers, this site is dedicated to helping anyone wanting to restore or modify their Mustang.... THERE ARE NO DUMB QUESTIONS!!!!!
Visit MustangSteve's web site to view some of my work and find details for:
FYIFORD Contributors' PICTURES - Power Brake Retrofit Kits for 65-66 Stangs - Classic Mustang FAQ's by MustangSteve - How to wire in a Duraspark Ignition - Mustang Ride Height Pictures and Descriptions - Steel Bushings to fit Granada Spindles to Mustang Tie Rods - Visit my EBAY store MustangSteve Performance - How to Install Granada Disc Brakes MustangSteve's Disc Brake Swap Page - FYIFORD Acronyms for guide to all the acronyms used on this page - FYIFORD Important information and upcoming events

You are not logged in. Would you like to login or register?

  • Index
  •  » FYI Ford, Classic Mustang Tech Discussion
  •  » Heater Blower - Squirrel Cage

    • 1 of 1

       

    5/22/2013 6:41 PM  #1

    Chelby-Ann
    FYI Addict

    Offline

    From: Mocksville, North Carolina
    Registered: 4/07/2013
    Posts: 165

    Heater Blower - Squirrel Cage

    Guys I need some help here. I am rebuilding my 69 Coupe Non A/C Heater Box. I bought a new motor from Rock Auto and bought the squirrel cage from CJ Pony. My problem is that the SC is about 1" larger then the original and will not work. CJ did not describe A/C or Non A/C and I had no clue. I suspect that this is for an A/C car. I cannot find a Non A/C blower motor SC. Can anyone point me in the right direction. Thanks. Bill

     

    5/22/2013 7:35 PM  #2

    GPatrick
    Senior 24-7 FYI Addict

    Offline

    Registered: 4/01/2013
    Posts: 1,104

    Re: Heater Blower - Squirrel Cage

    I found this in a search - someone looking for a Mustang wheel and this is what he was able to find:

    Thanks Everyone,

    I was able to track one down at West Coast Classic Cougars.

    Regards,

    Ron

    So, contact WCCC and see if they have one?

     

    5/23/2013 5:01 AM  #3

    DC
    Senior 24-7 FYI Addict

    Offline

    From: Marshall, MI
    Registered: 4/01/2013
    Posts: 1,246

    Re: Heater Blower - Squirrel Cage

    We have a local motor shop in Kalamazoo that has hundreds of SC's for any application. I was able to find one in his listings to make work. Check with your local shop that has parts for motors and furnace stuff.

     

    5/23/2013 5:08 AM  #4

    DC
    Senior 24-7 FYI Addict

    Offline

    From: Marshall, MI
    Registered: 4/01/2013
    Posts: 1,246

    Re: Heater Blower - Squirrel Cage

    Try these guys.

    http://www.blowerwheel.com/blower-wheels.htm

     

     

    1 of 1

  • Index
  •  » FYI Ford, Classic Mustang Tech Discussion
  •  »  Heater Blower - Squirrel Cage

    • Board footera


    REMEMBER!!! When posting a question about your Mustang or other Ford on this forum, BE SURE to tell us what it is, what year, engine, etc so we have enough information to go on.