FYI FORD - MustangSteve's Ford Mustang Forum
The Internet's Most Knowledgeable Classic Mustang Information
IF YOU HAVE A QUESTION ABOUT CLASSIC FORD MUSTANGS, YOU HAVE COME TO THE RIGHT PLACE!
MustangSteve has over 30 years of Mustang experience, having owned 30 of them and restored several others. With the help of other Mustangers, this site is dedicated to helping anyone wanting to restore or modify their Mustang.... THERE ARE NO DUMB QUESTIONS!!!!!
Visit MustangSteve's web site to view some of my work and find details for:
FYIFORD Contributors' PICTURES - Power Brake Retrofit Kits for 65-66 Stangs - Classic Mustang FAQ's by MustangSteve - How to wire in a Duraspark Ignition - Mustang Ride Height Pictures and Descriptions - Steel Bushings to fit Granada Spindles to Mustang Tie Rods - Visit my EBAY store MustangSteve Performance - How to Install Granada Disc Brakes MustangSteve's Disc Brake Swap Page - FYIFORD Acronyms for guide to all the acronyms used on this page - FYIFORD Important information and upcoming events

You are not logged in. Would you like to login or register?

5/22/2013 8:01 PM  #1


Borgeson Steering box hook up.

Hello everyone I hope you are all well.  it has been a while since I have been on here as well as since I have worked on the old stang. 

I got the bug again and am finishing my installation of a Power Steering borgeson box.  Just down to the hoses now and there is nothing that says which side is the High pressure side and low pressure side on the box.  If anyone could chime in and let me know (im looking straigt down on top of it while it is in the car) I would greatly appriciated it. 

Thanks

 

5/22/2013 9:13 PM  #2


Re: Borgeson Steering box hook up.

Connect conversion box to your original Ford pump with P/S hose kit #925107. (Arrows are cast into box 
indicating pressure and return. Return line is closest to the rag joint.)

These are from the borgeson instructions on-line.

 

5/22/2013 9:17 PM  #3


Re: Borgeson Steering box hook up.

Install #800330(See instructions for 800330) Power steering pump, bracket and pulley kit and connect to 
conversion box with P/S hose kit # 925108 or 925110. (Arrows are cast into box indicating pressure and 
return. Return line is closest to the rag joint.)

And this is from the section on the full kit for manual steering cars.

 

Board footera


REMEMBER!!! When posting a question about your Mustang or other Ford on this forum, BE SURE to tell us what it is, what year, engine, etc so we have enough information to go on.