FYI FORD - MustangSteve's Ford Mustang Forum
The Internet's Most Knowledgeable Classic Mustang Information
IF YOU HAVE A QUESTION ABOUT CLASSIC FORD MUSTANGS, YOU HAVE COME TO THE RIGHT PLACE!
MustangSteve has over 30 years of Mustang experience, having owned 30 of them and restored several others. With the help of other Mustangers, this site is dedicated to helping anyone wanting to restore or modify their Mustang.... THERE ARE NO DUMB QUESTIONS!!!!!
Visit MustangSteve's web site to view some of my work and find details for:
FYIFORD Contributors' PICTURES - Power Brake Retrofit Kits for 65-66 Stangs - Classic Mustang FAQ's by MustangSteve - How to wire in a Duraspark Ignition - Mustang Ride Height Pictures and Descriptions - Steel Bushings to fit Granada Spindles to Mustang Tie Rods - Visit my EBAY store MustangSteve Performance - How to Install Granada Disc Brakes MustangSteve's Disc Brake Swap Page - FYIFORD Acronyms for guide to all the acronyms used on this page - FYIFORD Important information and upcoming events

You are not logged in. Would you like to login or register?

  • Index
  •  » FYI Ford, Classic Mustang Tech Discussion
  •  » pertronic ign

    • 1 of 1

       

    8/14/2015 5:45 PM  #1

    zimmy2nn
    FYI FORD Member

    Offline

    Registered: 5/09/2013
    Posts: 21

    pertronic ign

    i have a 65 mustang with a 200 in line six  and saw a post on here where steve  had a diagram  to wire it  where can i find thatr diagram ?
    thanks jim

     

    8/14/2015 8:35 PM  #2

    Hornman
    Senior 24-7 FYI Addict

    Offline

    From: Mansfield, Texas
    Registered: 4/01/2013
    Posts: 1,568

    Re: pertronic ign

    Use the Pertronix wiring diagram. Mustang Steve's wiring diagram is for the Ford Duraspark ignition.

     

    8/15/2015 10:07 AM  #3

    boomyal
    Senior 24-7 FYI Addict

    Offline

    From: Vancouver, Washington
    Registered: 4/01/2013
    Posts: 1,295

    Re: pertronic ign

    Wiring is easy for the Pertronix.  The red wire goes to the coil positive and the and the black wire goes to the coil negative.  You should also get a matching coil for the Pertronix then bypass the resistance wire on the feed from the ignition switch to the coil positive.  Also, I hope you get the Pertronix II.

     

     

    1 of 1

  • Index
  •  » FYI Ford, Classic Mustang Tech Discussion
  •  »  pertronic ign

    • Board footera


    REMEMBER!!! When posting a question about your Mustang or other Ford on this forum, BE SURE to tell us what it is, what year, engine, etc so we have enough information to go on.