FYI FORD - MustangSteve's Ford Mustang Forum
The Internet's Most Knowledgeable Classic Mustang Information
IF YOU HAVE A QUESTION ABOUT CLASSIC FORD MUSTANGS, YOU HAVE COME TO THE RIGHT PLACE!
MustangSteve has over 30 years of Mustang experience, having owned 30 of them and restored several others. With the help of other Mustangers, this site is dedicated to helping anyone wanting to restore or modify their Mustang.... THERE ARE NO DUMB QUESTIONS!!!!!
Visit MustangSteve's web site to view some of my work and find details for:
FYIFORD Contributors' PICTURES - Power Brake Retrofit Kits for 65-66 Stangs - Classic Mustang FAQ's by MustangSteve - How to wire in a Duraspark Ignition - Mustang Ride Height Pictures and Descriptions - Steel Bushings to fit Granada Spindles to Mustang Tie Rods - Visit my EBAY store MustangSteve Performance - How to Install Granada Disc Brakes MustangSteve's Disc Brake Swap Page - FYIFORD Acronyms for guide to all the acronyms used on this page - FYIFORD Important information and upcoming events

You are not logged in. Would you like to login or register?

  • Index
  •  » Swap Meet
  •  » 05-07 Wheels wanted

    • 1 of 1

       

    12/24/2015 8:45 AM  #1

    66 coupe
    FYI Addict

    Offline

    From: Lockhart & New Braunfels, Tx
    Registered: 5/16/2013
    Posts: 112

    05-07 Wheels wanted

    I'm looking for a set of 17" wheels from what I think is an 05-07 Mustang GT for my 66 Coupe.  This car will be driven so 'out of the box perfect' condition is not important, as long as they are road worthy and not curb surfers.  I'll consider other wheels too if they have the look we're interested in.  Tire condition not important, they will probably be replaced anyway (I've had too many problems with tire failures due to age).

    Located in Central Texas, between Austin and San Antonio.

     

    12/24/2015 4:44 PM  #2

    MS
    Forum Originator

    Offline

    From: Canyon Lake, Texas
    Registered: 1/24/2013
    Posts: 12,078

    Re: 05-07 Wheels wanted

    I think I have a couple of near new 17x8 wheels from a 2006, the Bullitt style.  Be aware these have deeper backspacing than the ones most would use on a 65/66 and the fronts require a 1.25" spacer to clear the UCA. These are 17x8 factory wheels with 5.92" backspacing.  Email me steve@mustangsteve.com if you are remotely interested.
    We will be going to San Antonio in a few weeks and could deliver.
    I also have a near new set of caps for four wheels.

    Money you enjoy wasting is NOT wasted money... unless your wife finds out.
     

     

    1 of 1

  • Index
  •  » Swap Meet
  •  »  05-07 Wheels wanted

    • Board footera


    REMEMBER!!! When posting a question about your Mustang or other Ford on this forum, BE SURE to tell us what it is, what year, engine, etc so we have enough information to go on.