FYI FORD - MustangSteve's Ford Mustang Forum
The Internet's Most Knowledgeable Classic Mustang Information
IF YOU HAVE A QUESTION ABOUT CLASSIC FORD MUSTANGS, YOU HAVE COME TO THE RIGHT PLACE!
MustangSteve has over 30 years of Mustang experience, having owned 30 of them and restored several others. With the help of other Mustangers, this site is dedicated to helping anyone wanting to restore or modify their Mustang.... THERE ARE NO DUMB QUESTIONS!!!!!
Visit MustangSteve's web site to view some of my work and find details for:
FYIFORD Contributors' PICTURES - Power Brake Retrofit Kits for 65-66 Stangs - Classic Mustang FAQ's by MustangSteve - How to wire in a Duraspark Ignition - Mustang Ride Height Pictures and Descriptions - Steel Bushings to fit Granada Spindles to Mustang Tie Rods - Visit my EBAY store MustangSteve Performance - How to Install Granada Disc Brakes MustangSteve's Disc Brake Swap Page - FYIFORD Acronyms for guide to all the acronyms used on this page - FYIFORD Important information and upcoming events

You are not logged in. Would you like to login or register?

  • Index
  •  » FYI Ford, Classic Mustang Tech Discussion
  •  » front brake hoses

    • 1 of 1

       

    3/19/2016 8:44 AM  #1

    Mobygrape
    Unregistered

    front brake hoses

    I need front brake hoses for my 66 Mustang Steve conversion to 2011 GT disk brakes.  I haven't found any place that will make them.  Thanks.

     

    3/19/2016 8:48 AM  #2

    TKOPerformance
    Hyper FYIFORD ADDICT

    Offline

    From: Newark, DE
    Registered: 12/15/2014
    Posts: 7,550

    Re: front brake hoses

    Try either the local NAPA (the one by me makes lines up in the store) or look in the yellow pages for a hydraulic repair shop.  Hydraulic shops are great for stuff like this, as well as oddball fittings you might need for anything fluid runs through.  Benz Hydraulics down by me has saved my butt a couple times over the years with seemingly impossible to find fittings. 

     

    3/19/2016 9:28 AM  #3

    George
    FYI FORD Member

    Offline

    From: Central California
    Registered: 4/01/2013
    Posts: 34

    Re: front brake hoses

    I used 1970 disc brake hoses on my 66 with a 2006 MS conversion

    Cut to fit, Pound to shape, Paint to match
     

    3/19/2016 12:35 PM  #4

    MS
    Forum Originator

    Offline

    From: Canyon Lake, Texas
    Registered: 1/24/2013
    Posts: 12,313

    Re: front brake hoses

    The late model front disc hoses work perfect. 2005 -  2010

    The 70 hoses would be a great choice but were a little short for my taste.  Might depend on the ride height of your car.

    Money you enjoy wasting is NOT wasted money... unless your wife finds out.
     

    3/19/2016 2:35 PM  #5

    BillyC
    I FYI 24-7

    Offline

    From: Chesapeake, Va.
    Registered: 4/02/2013
    Posts: 966

    Re: front brake hoses

    I used JEGS 555-635300.

    "anyone that stops learning is old, whether at twenty or eighty"Henry Ford
     

     

    1 of 1

  • Index
  •  » FYI Ford, Classic Mustang Tech Discussion
  •  »  front brake hoses

    • Board footera


    REMEMBER!!! When posting a question about your Mustang or other Ford on this forum, BE SURE to tell us what it is, what year, engine, etc so we have enough information to go on.