FYI FORD - MustangSteve's Ford Mustang Forum
The Internet's Most Knowledgeable Classic Mustang Information
IF YOU HAVE A QUESTION ABOUT CLASSIC FORD MUSTANGS, YOU HAVE COME TO THE RIGHT PLACE!
MustangSteve has over 30 years of Mustang experience, having owned 30 of them and restored several others. With the help of other Mustangers, this site is dedicated to helping anyone wanting to restore or modify their Mustang.... THERE ARE NO DUMB QUESTIONS!!!!!
Visit MustangSteve's web site to view some of my work and find details for:
FYIFORD Contributors' PICTURES - Power Brake Retrofit Kits for 65-66 Stangs - Classic Mustang FAQ's by MustangSteve - How to wire in a Duraspark Ignition - Mustang Ride Height Pictures and Descriptions - Steel Bushings to fit Granada Spindles to Mustang Tie Rods - Visit my EBAY store MustangSteve Performance - How to Install Granada Disc Brakes MustangSteve's Disc Brake Swap Page - FYIFORD Acronyms for guide to all the acronyms used on this page - FYIFORD Important information and upcoming events

You are not logged in. Would you like to login or register?

  • Index
  •  » Paint & Body
  •  » Eng. bay finish?

    • 1 of 1

       

    3/29/2016 9:06 PM  #1

    Ozblitz
    I FYI 24-7

    Offline

    From: Richmond, TX
    Registered: 4/14/2013
    Posts: 413

    Eng. bay finish?

    Ok, Shop I go to always uses a steel supply "ornamental black" for the eng. bays.  I really think its very close to flat black.  So, I bought a gallon of Gloss black (same brand paint) and mixed 50/50 in hopes to get semi-gloss.  Well... Its a little more glossy than I wanted.  I'm Considering painting the bay a 3rd time so, should I try 70% flat and 30% gloss or 80% flat and 20% gloss?

     

    3/30/2016 6:56 AM  #2

    jerseyjoe
    I FYI 24-7

    Offline

    Registered: 4/01/2013
    Posts: 789

    Re: Eng. bay finish?

    The industry standard...SEM Trim Black 39143..flat semi gloss .easy tuch up, blends perfectlt every time..I know ,I know,  your buddy's have something better..friends this is the one you want.....jj

    Last edited by jerseyjoe (3/30/2016 7:05 AM)

    "Never put a question mark where God put a period "  Richard Petty
     

    3/30/2016 7:07 AM  #3

    Ozblitz
    I FYI 24-7

    Offline

    From: Richmond, TX
    Registered: 4/14/2013
    Posts: 413

    Re: Eng. bay finish?

    Thanks JJ, but I still have 2 gallons Of black

       •Thread Starter
     

    3/30/2016 7:13 AM  #4

    jerseyjoe
    I FYI 24-7

    Offline

    Registered: 4/01/2013
    Posts: 789

    Re: Eng. bay finish?

    Ozblitz wrote:

    Thanks JJ, but I still have 2 gallons Of black

    Go to a  auto paint supply store they can put a flattening agent in it for you..no need to mix half and half....good luck.....jj

    "Never put a question mark where God put a period "  Richard Petty
     

    3/30/2016 9:47 AM  #5

    DBROWN
    FYI Addict

    Offline

    Registered: 9/10/2013
    Posts: 132

    Re: Eng. bay finish?

    Mix small amounts in a dixie cup usings a tablespoon. since 50/50 was too glossy , mix one tbls. gloss to 2 flat. At the same time mix one 1 to 3, one 1 to 4. Spray out with a touch up gun if you have one and see if it gives you the sheen you want. Don't test on your engine bay until you get it right.

     

    3/31/2016 7:49 PM  #6

    MS
    Forum Originator

    Offline

    From: Canyon Lake, Texas
    Registered: 1/24/2013
    Posts: 12,157

    Re: Eng. bay finish?

    All of that mixing guarantees you will never match that color it you ever need to. Luckily black is pretty forgiving, especially under the hood.

    I used to use Rustoleum 7777 but they changed it in the last couple of years.

    My new favorite, which is JUST RIGHT is VHT chassis and roll bar black. Perfect satin, dries fast and touch ups match perfectly.

    Money you enjoy wasting is NOT wasted money... unless your wife finds out.
     

    4/01/2016 5:32 AM  #7

    terry
    Senior 24-7 FYI Addict

    Offline

    From: vandalia, illinois
    Registered: 4/01/2013
    Posts: 1,868

    Re: Eng. bay finish?

    My buddy that owns a body shop says you can use a ordinary household product to flatten that, problem is I cant remember what it is.  I'm thinking corn starch!  I'll find out later and let you know!  but JJ was right they do sell a flattening agent!!  we repainted the gas tank on a 31 model A a couple years ago and he was able to get it to match PERFECTLY!!

     

    4/01/2016 8:23 PM  #8

    Ozblitz
    I FYI 24-7

    Offline

    From: Richmond, TX
    Registered: 4/14/2013
    Posts: 413

    Re: Eng. bay finish?

    I'll find out tomorrow how 70/30 vs. 80/20 come out.  I'll do some small test mixing with a paint mixing cup to get right measurements.  Will keep you posted.

    Last edited by Ozblitz (4/01/2016 8:24 PM)

       •Thread Starter
     

    4/02/2016 5:54 AM  #9

    terry
    Senior 24-7 FYI Addict

    Offline

    From: vandalia, illinois
    Registered: 4/01/2013
    Posts: 1,868

    Re: Eng. bay finish?

    Corn starch it is!  he said you just have to mix mix mix mix and then mix some more.  the more starch you put the duller it gets

     

    4/05/2016 4:26 PM  #10

    Rudi
    Senior 24-7 FYI Addict

    Offline

    From: Stuck in the 50's Welland Ca
    Registered: 4/01/2013
    Posts: 3,936

    Re: Eng. bay finish?

    Corn Starch!!!!         OMG the engine bay is gonna smell like your wife's kitchen oven.

    Good work ain't cheap, Cheap work ain't good!   Simple Man
     

    4/09/2016 9:22 AM  #11

    True74yamaha
    Senior 24-7 FYI Addict

    Offline

    From: Salt Lake City
    Registered: 5/07/2013
    Posts: 2,526

    Re: Eng. bay finish?

    go the nearest autobody supply and get a flattening agent for the paint. Thay or use SEM trim black or rustoleum satin 7777.

     

    4/11/2016 9:29 PM  #12

    Hornman
    Senior 24-7 FYI Addict

    Offline

    From: Mansfield, Texas
    Registered: 4/01/2013
    Posts: 1,568

    Re: Eng. bay finish?

    Not corn starch! Talcum powder!

     

     

    1 of 1

  • Index
  •  » Paint & Body
  •  »  Eng. bay finish?

    • Board footera


    REMEMBER!!! When posting a question about your Mustang or other Ford on this forum, BE SURE to tell us what it is, what year, engine, etc so we have enough information to go on.