| ||
Visit MustangSteve's web site to view some of my work and find details for: FYIFORD Contributors' PICTURES - Power Brake Retrofit Kits for 65-66 Stangs - Classic Mustang FAQ's by MustangSteve - How to wire in a Duraspark Ignition - Mustang Ride Height Pictures and Descriptions - Steel Bushings to fit Granada Spindles to Mustang Tie Rods - Visit my EBAY store MustangSteve Performance - How to Install Granada Disc Brakes MustangSteve's Disc Brake Swap Page - FYIFORD Acronyms for guide to all the acronyms used on this page - FYIFORD Important information and upcoming events |
1 of 1
Offline
anyone using a corso shelby style steering wheel on a 66 by scott drake,im having problems with turn signals not canceling i think the pins are too short or an i missing something see link for the wheel and hub which i got for cjpony.
Last edited by GT350 (5/22/2016 2:56 PM)
Offline
I think they claim that all that apparatus is improved compared to other wheels. I contemplated trying that one because I like the 14" diameter, but I do not like the skinny grip.
Last edited by boomyal (5/22/2016 3:03 PM)
Offline
Take the canceling cam from the original wheel and clamp it to the back of the adapter. Works great.
Offline
MS, what do you mean about 'clamping' it to the back of the adapter?
Offline
It is a very strong spring that clamps itself to the back of the adapter. Put some red Loctite on it and it will be there forever.
Offline
Good tip Steve. I installed mine today. On my drake wheel I was disappointed with the roll pin deal once again. Stock Henry cancel ring was the ticket. One thing- do not push the ring down so far on the wheel that it makes contact with the contact plate. Leave an 1/8 or so or it will short out everything. By the way, I don't think anybody is repoppping that spring ring-never throw one of those away!
1 of 1
REMEMBER!!! When posting a question about your Mustang or other Ford on this forum, BE SURE to tell us what it is, what year, engine, etc so we have enough information to go on. |