| ||
Visit MustangSteve's web site to view some of my work and find details for: FYIFORD Contributors' PICTURES - Power Brake Retrofit Kits for 65-66 Stangs - Classic Mustang FAQ's by MustangSteve - How to wire in a Duraspark Ignition - Mustang Ride Height Pictures and Descriptions - Steel Bushings to fit Granada Spindles to Mustang Tie Rods - Visit my EBAY store MustangSteve Performance - How to Install Granada Disc Brakes MustangSteve's Disc Brake Swap Page - FYIFORD Acronyms for guide to all the acronyms used on this page - FYIFORD Important information and upcoming events |
Offline
Grabber Blu wrote:
Have rev limiter verification enabled. If you do every time you turn the key on FiTech thinks the engine is running and dumps a ton of fuel in response to the RPM
Never enabled it.
Offline
Also check that you have 12 volts Cranking. I had a similar problem as yours and I didn't have the 12 volts at crank. It would fire, shut off and wouldn't fire again. I also have had mine as long as Larry with no issues. Mine works Great! Steve69
Last edited by Steve69 (7/16/2016 7:01 PM)
Offline
Steve69 wrote:
Also check that you have 12 volts Cranking. I had a similar problem as yours and I didn't have the 12 volts at crank. It would fire, shut off and wouldn't fire again. I also have had mine as long as Larry with no issues. Mine works Great! Steve69
I guess I'm the lucky one. I will check that I have 12volts when cranking. Since I have been cranking it over so many times I leave the battery charger on it when I am cranking so it should have 13+ volts.
REMEMBER!!! When posting a question about your Mustang or other Ford on this forum, BE SURE to tell us what it is, what year, engine, etc so we have enough information to go on. |