FYI FORD - MustangSteve's Ford Mustang Forum
The Internet's Most Knowledgeable Classic Mustang Information
IF YOU HAVE A QUESTION ABOUT CLASSIC FORD MUSTANGS, YOU HAVE COME TO THE RIGHT PLACE!
MustangSteve has over 30 years of Mustang experience, having owned 30 of them and restored several others. With the help of other Mustangers, this site is dedicated to helping anyone wanting to restore or modify their Mustang.... THERE ARE NO DUMB QUESTIONS!!!!!
Visit MustangSteve's web site to view some of my work and find details for:
FYIFORD Contributors' PICTURES - Power Brake Retrofit Kits for 65-66 Stangs - Classic Mustang FAQ's by MustangSteve - How to wire in a Duraspark Ignition - Mustang Ride Height Pictures and Descriptions - Steel Bushings to fit Granada Spindles to Mustang Tie Rods - Visit my EBAY store MustangSteve Performance - How to Install Granada Disc Brakes MustangSteve's Disc Brake Swap Page - FYIFORD Acronyms for guide to all the acronyms used on this page - FYIFORD Important information and upcoming events

You are not logged in. Would you like to login or register?

  • Index
  •  » FYI Ford, Classic Mustang Tech Discussion
  •  » I want to thank member GaryPatrick for his help.

    • 1 of 1

       

    4/03/2013 11:59 AM  #1

    Mochaman
    Senior 24-7 FYI Addict

    Offline

    From: Royse City, Texas
    Registered: 4/02/2013
    Posts: 1,430

    I want to thank member GaryPatrick for his help.

    I haven't seen him on the new Forum Board, but if he reads this, I wanted to thank him for his help on my Broken Wheel Stud on my rear end rebuild.

    I received a donated Lincoln Versaille 9 inch that had a broken stud on one Axle. All of the attempts to change this out were failing. I took some pictures and posted them. GaryPatrick recommended that I check to see if the Axles were actually from a Granada. BINGO!

    So my free rear end housing was from a Lincoln, but the axles were from another car.

    Now I am onto making all new brake lines.

     

    4/03/2013 12:47 PM  #2

    GT350
    FYI Addict

    Offline

    From: scotland u.k
    Registered: 4/01/2013
    Posts: 277

    Re: I want to thank member GaryPatrick for his help.

    same here gary was a great help to me thanks javed

     

    4/03/2013 6:08 PM  #3

    dwalker2
    FYI FORD Member

    Offline

    From: Northern NJ
    Registered: 4/01/2013
    Posts: 44

    Re: I want to thank member GaryPatrick for his help.

    I also wanna thank GaryPatrick. He and I troubleshot some issues I was having with my Holley carb and he really helped me out!

    All throttle no bottle
     

    4/03/2013 6:57 PM  #4

    GPatrick
    Senior 24-7 FYI Addict

    Offline

    Registered: 4/01/2013
    Posts: 1,086

    Re: I want to thank member GaryPatrick for his help.

    Gosh - thanks.  I'm a troubleshooter by nature and by trade so enjoy a challenge.  I have to admit that the Granada axles was a good guess!

     

     

    1 of 1

  • Index
  •  » FYI Ford, Classic Mustang Tech Discussion
  •  »  I want to thank member GaryPatrick for his help.

    • Board footera


    REMEMBER!!! When posting a question about your Mustang or other Ford on this forum, BE SURE to tell us what it is, what year, engine, etc so we have enough information to go on.