FYI FORD - MustangSteve's Ford Mustang Forum
The Internet's Most Knowledgeable Classic Mustang Information
IF YOU HAVE A QUESTION ABOUT CLASSIC FORD MUSTANGS, YOU HAVE COME TO THE RIGHT PLACE!
MustangSteve has over 30 years of Mustang experience, having owned 30 of them and restored several others. With the help of other Mustangers, this site is dedicated to helping anyone wanting to restore or modify their Mustang.... THERE ARE NO DUMB QUESTIONS!!!!!
Visit MustangSteve's web site to view some of my work and find details for:
FYIFORD Contributors' PICTURES - Power Brake Retrofit Kits for 65-66 Stangs - Classic Mustang FAQ's by MustangSteve - How to wire in a Duraspark Ignition - Mustang Ride Height Pictures and Descriptions - Steel Bushings to fit Granada Spindles to Mustang Tie Rods - Visit my EBAY store MustangSteve Performance - How to Install Granada Disc Brakes MustangSteve's Disc Brake Swap Page - FYIFORD Acronyms for guide to all the acronyms used on this page - FYIFORD Important information and upcoming events

You are not logged in. Would you like to login or register?

  • Index
  •  » FYI Ford, Classic Mustang Tech Discussion
  •  » V I N location on 65 through 68

    • 1 of 1

       

    3/29/2017 7:33 PM  #1

    john68
    FYI FORD Member

    Offline

    From: Cookeville, TN
    Registered: 4/01/2013
    Posts: 17

    V I N location on 65 through 68

    understand V I N is on door, on driver side cut out, passenger side under fender, and passenger frame rail.  Any other locations?

     

    3/29/2017 8:25 PM  #2

    josh-kebob
    Senior 24-7 FYI Addict

    Offline

    From: Madison, AL
    Registered: 4/06/2013
    Posts: 2,902

    Re: V I N location on 65 through 68

    VIN locations are on the DS inner fender, visible because of the fender cut out........as you described.
    Two other locations are located on the rear inner fenders........can't be seen with fenders installed.
    Never heard of, nor seen a VIN stamped on a frame rail..
    Door data plate has VIN stamped, as you described

    On a '68, in addition to the above locations, the VIN is stamped on a VIN tag that's riveted to the passenger side dash....visible through the windshield.

    Google this for pics to use a better reference.......

     

    3/30/2017 11:18 AM  #3

    john68
    FYI FORD Member

    Offline

    From: Cookeville, TN
    Registered: 4/01/2013
    Posts: 17

    Re: V I N location on 65 through 68

    Thanks, could not find vin on frame rail

    Feels good to drive 68 after three year storage

    John

       •Thread Starter
     

    3/30/2017 7:09 PM  #4

    josh-kebob
    Senior 24-7 FYI Addict

    Offline

    From: Madison, AL
    Registered: 4/06/2013
    Posts: 2,902

    Re: V I N location on 65 through 68

    A '68 coupe was my very first Mustang........purchased then for $400 which was a lot when you're a poor, starving, married, enlisted USAF dude.......loved that car and wish I still had it...post some pics of your car if/when you can.

     

     

    1 of 1

  • Index
  •  » FYI Ford, Classic Mustang Tech Discussion
  •  »  V I N location on 65 through 68

    • Board footera


    REMEMBER!!! When posting a question about your Mustang or other Ford on this forum, BE SURE to tell us what it is, what year, engine, etc so we have enough information to go on.