FYI FORD - MustangSteve's Ford Mustang Forum
The Internet's Most Knowledgeable Classic Mustang Information
IF YOU HAVE A QUESTION ABOUT CLASSIC FORD MUSTANGS, YOU HAVE COME TO THE RIGHT PLACE!
MustangSteve has over 30 years of Mustang experience, having owned 30 of them and restored several others. With the help of other Mustangers, this site is dedicated to helping anyone wanting to restore or modify their Mustang.... THERE ARE NO DUMB QUESTIONS!!!!!
Visit MustangSteve's web site to view some of my work and find details for:
FYIFORD Contributors' PICTURES - Power Brake Retrofit Kits for 65-66 Stangs - Classic Mustang FAQ's by MustangSteve - How to wire in a Duraspark Ignition - Mustang Ride Height Pictures and Descriptions - Steel Bushings to fit Granada Spindles to Mustang Tie Rods - Visit my EBAY store MustangSteve Performance - How to Install Granada Disc Brakes MustangSteve's Disc Brake Swap Page - FYIFORD Acronyms for guide to all the acronyms used on this page - FYIFORD Important information and upcoming events

You are not logged in. Would you like to login or register?

5/30/2017 7:55 AM  #1


EGR Vacuum Regulator?

My EFI harness calls out a EGR Vacuum regulator. 



Where does this go?  What does this do? I can't find a vacuum diagram for foxbody era mustang.

 

5/30/2017 10:11 AM  #2


Re: EGR Vacuum Regulator?

Here's a link to many things efi, and vacuum, for mustangs of the fox era.  Scroll down to the vac diagram.  The regulator is in the upper left corner of the drawing.

http://www.veryuseful.com/mustang/tech/engine/

Last edited by TimC (5/30/2017 10:15 AM)

 

6/03/2017 9:56 AM  #3


Re: EGR Vacuum Regulator?

It sends vacuum to the egr valve using  a signal from the pcm. There is usually a red plastic line from the regulator to the egr valve on the stock FORD vacuum harness.

 

Board footera


REMEMBER!!! When posting a question about your Mustang or other Ford on this forum, BE SURE to tell us what it is, what year, engine, etc so we have enough information to go on.