FYI FORD - MustangSteve's Ford Mustang Forum
The Internet's Most Knowledgeable Classic Mustang Information
IF YOU HAVE A QUESTION ABOUT CLASSIC FORD MUSTANGS, YOU HAVE COME TO THE RIGHT PLACE!
MustangSteve has over 30 years of Mustang experience, having owned 30 of them and restored several others. With the help of other Mustangers, this site is dedicated to helping anyone wanting to restore or modify their Mustang.... THERE ARE NO DUMB QUESTIONS!!!!!
Visit MustangSteve's web site to view some of my work and find details for:
FYIFORD Contributors' PICTURES - Power Brake Retrofit Kits for 65-66 Stangs - Classic Mustang FAQ's by MustangSteve - How to wire in a Duraspark Ignition - Mustang Ride Height Pictures and Descriptions - Steel Bushings to fit Granada Spindles to Mustang Tie Rods - Visit my EBAY store MustangSteve Performance - How to Install Granada Disc Brakes MustangSteve's Disc Brake Swap Page - FYIFORD Acronyms for guide to all the acronyms used on this page - FYIFORD Important information and upcoming events

You are not logged in. Would you like to login or register?

  • Index
  •  » FYI Ford, Classic Mustang Tech Discussion
  •  » Suggestions for Washer Reservoir / Pump ?

    • 1 of 1

       

    6/11/2017 11:16 AM  #1

    McStang
    I FYI 24-7

    Offline

    From: Benicia, CA
    Registered: 4/01/2013
    Posts: 495

    Suggestions for Washer Reservoir / Pump ?

    Looking for something to replace the bag on a '66. Wondering if anyone has found something that fits well that won't flop around? An integral pump would be nice too.

    (Pinto!)
     

    6/11/2017 12:29 PM  #2

    BobE
    Senior 24-7 FYI Addict

    Offline

    From: White Plains, NY
    Registered: 4/04/2013
    Posts: 2,694

    Re: Suggestions for Washer Reservoir / Pump ?

    Not sure this will help, but something to consider.  I've seen it mounted inside the front fender (behind the headlight bucket) with just the filler neck in the engine compartment.  When I get around to re-installing this reservoir that's where I'd be looking to place it.  

    65 Fastback, 351W, 5-speed, 4 wheel discs, 9" rear,  R&C Front End.
     

    6/11/2017 12:57 PM  #3

    terry
    Senior 24-7 FYI Addict

    Offline

    From: vandalia, illinois
    Registered: 4/01/2013
    Posts: 1,879

    Re: Suggestions for Washer Reservoir / Pump ?

    McStang wrote:

    Looking for something to replace the bag on a '66. Wondering if anyone has found something that fits well that won't flop around? An integral pump would be nice too.

    I have 2 stainless steel tanks mounted on the driver's fender well.  One is the overflow for the radiator and the other is for the washer fluid.  I believe I ordered a generic washer pump from Rock Auto.  This is what they look like.  This was before I added the second one for the washer. but you get the Idea!

    Last edited by terry (6/11/2017 1:04 PM)

     

    6/12/2017 1:59 PM  #4

    McStang
    I FYI 24-7

    Offline

    From: Benicia, CA
    Registered: 4/01/2013
    Posts: 495

    Re: Suggestions for Washer Reservoir / Pump ?

    I like the stainless tank idea, simple (like me) thanks for the ideas.

    (Pinto!)
       •Thread Starter
     

     

    1 of 1

  • Index
  •  » FYI Ford, Classic Mustang Tech Discussion
  •  »  Suggestions for Washer Reservoir / Pump ?

    • Board footera


    REMEMBER!!! When posting a question about your Mustang or other Ford on this forum, BE SURE to tell us what it is, what year, engine, etc so we have enough information to go on.