FYI FORD - MustangSteve's Ford Mustang Forum
The Internet's Most Knowledgeable Classic Mustang Information
IF YOU HAVE A QUESTION ABOUT CLASSIC FORD MUSTANGS, YOU HAVE COME TO THE RIGHT PLACE!
MustangSteve has over 30 years of Mustang experience, having owned 30 of them and restored several others. With the help of other Mustangers, this site is dedicated to helping anyone wanting to restore or modify their Mustang.... THERE ARE NO DUMB QUESTIONS!!!!!
Visit MustangSteve's web site to view some of my work and find details for:
FYIFORD Contributors' PICTURES - Power Brake Retrofit Kits for 65-66 Stangs - Classic Mustang FAQ's by MustangSteve - How to wire in a Duraspark Ignition - Mustang Ride Height Pictures and Descriptions - Steel Bushings to fit Granada Spindles to Mustang Tie Rods - Visit my EBAY store MustangSteve Performance - How to Install Granada Disc Brakes MustangSteve's Disc Brake Swap Page - FYIFORD Acronyms for guide to all the acronyms used on this page - FYIFORD Important information and upcoming events

You are not logged in. Would you like to login or register?

  • Index
  •  » FYI Ford, Classic Mustang Tech Discussion
  •  » Borg Warner T-10 shifter

    • 1 of 1

       

    10/28/2017 12:20 PM  #1

    rocky66
    Unregistered

    Borg Warner T-10 shifter

    Hi glad to be on the forum. I have a 66 coupe with a 302, roller rockers. 351C heads. BW T-10 four speed model 415. My question is does anybody make a shifter to fit this model T-10. The research I have done tells me Hurst does not make one or at least not the install kit. Any advise would be appreciated. Thanks in advance.

     

    10/28/2017 1:55 PM  #2

    6sally6
    Hyper FYIFORD ADDICT

    Offline

    From: Surfside Beach,SC
    Registered: 4/02/2013
    Posts: 6,772

    Re: Borg Warner T-10 shifter

    You try Summit?!!
    They got EVERYTHANG!!
    Welcome to the forum!!
    6sally6

    Get busy Liv'in or get busy Die'n....Host of the 2020 Bash at the Beach/The only Bash that got cancelled  )8
     

    10/28/2017 3:06 PM  #3

    TimC
    I FYI 24-7

    Offline

    From: Wheaton, Illinois
    Registered: 4/01/2013
    Posts: 873

    Re: Borg Warner T-10 shifter

    Welcome to the best place on the web for early Mustang experience.  Hurst still sells the competition plus shifter for the T10.  You need the shifter with the correct handle.  Hurst number is 393-3180.  Then you need the installation kit for the B/W T10 (top loader is a different kit.  make sure you have the T10)  Hurst installation kit for the T10 is 3733668.  Both are available from various sellers on eBay.  Every once in awhile, a good used one shows up in the $150 range.  I wanted one, but put the $$$ towards a T5 swap, instead.....

     

    10/28/2017 11:27 PM  #4

    rocky66
    Unregistered

    Re: Borg Warner T-10 shifter

    Thanks everyone for the help I will check it out.

       •Thread Starter
     

    10/29/2017 7:27 AM  #5

    Steve69
    Senior 24-7 FYI Addict

    Offline

    From: Madison Wisconsin
    Registered: 4/01/2013
    Posts: 2,727

    Re: Borg Warner T-10 shifter

    Check on Ebay too.  I sold my T10 Shifter and linkage a few years back for $160.00

     

    10/30/2017 3:11 AM  #6

    Al Newman
    FYI Addict

    Offline

    Registered: 4/08/2013
    Posts: 222

    Re: Borg Warner T-10 shifter

    Best advice of all responses was to save your money to put on a T-5.  Sorry, but I've never had a good experience with T-10s
    Best
    Al

    Classic cars are full of surprises and almost none of them are good ones!
     

    10/30/2017 5:25 AM  #7

    Steve69
    Senior 24-7 FYI Addict

    Offline

    From: Madison Wisconsin
    Registered: 4/01/2013
    Posts: 2,727

    Re: Borg Warner T-10 shifter

    Al Newman wrote:

    Best advice of all responses was to save your money to put on a T-5. Sorry, but I've never had a good experience with T-10s
    Best
    Al

      Very True!  Mine was noisy and when I went to a T5 I was very happy with the Swap!
     

     

    10/30/2017 7:21 AM  #8

    jerseyjoe
    I FYI 24-7

    Offline

    Registered: 4/01/2013
    Posts: 789

    Re: Borg Warner T-10 shifter

    rocky66 wrote:

    Hi glad to be on the forum. I have a 66 coupe with a 302, roller rockers. 351C heads. BW T-10 four speed model 415. My question is does anybody make a shifter to fit this model T-10. The research I have done tells me Hurst does not make one or at least not the install kit. Any advise would be appreciated. Thanks in advance.

    Your day just got better...this guy has shifters of all types...Comp +...BW...T10...Falcon.....e-mail him....a427v8@yahoo.com..........jj
     

    "Never put a question mark where God put a period "  Richard Petty
     

     

    1 of 1

  • Index
  •  » FYI Ford, Classic Mustang Tech Discussion
  •  »  Borg Warner T-10 shifter

    • Board footera


    REMEMBER!!! When posting a question about your Mustang or other Ford on this forum, BE SURE to tell us what it is, what year, engine, etc so we have enough information to go on.