FYI FORD - MustangSteve's Ford Mustang Forum
The Internet's Most Knowledgeable Classic Mustang Information
IF YOU HAVE A QUESTION ABOUT CLASSIC FORD MUSTANGS, YOU HAVE COME TO THE RIGHT PLACE!
MustangSteve has over 30 years of Mustang experience, having owned 30 of them and restored several others. With the help of other Mustangers, this site is dedicated to helping anyone wanting to restore or modify their Mustang.... THERE ARE NO DUMB QUESTIONS!!!!!
Visit MustangSteve's web site to view some of my work and find details for:
FYIFORD Contributors' PICTURES - Power Brake Retrofit Kits for 65-66 Stangs - Classic Mustang FAQ's by MustangSteve - How to wire in a Duraspark Ignition - Mustang Ride Height Pictures and Descriptions - Steel Bushings to fit Granada Spindles to Mustang Tie Rods - Visit my EBAY store MustangSteve Performance - How to Install Granada Disc Brakes MustangSteve's Disc Brake Swap Page - FYIFORD Acronyms for guide to all the acronyms used on this page - FYIFORD Important information and upcoming events

You are not logged in. Would you like to login or register?

  • Index
  •  » FYI Ford, Classic Mustang Tech Discussion
  •  » Tranny cooler lines

    • 1 of 1

       

    9/07/2018 6:03 PM  #1

    rtmjr13@optonline.net
    FYI Addict

    Offline

    From: Long Island New York
    Registered: 3/12/2014
    Posts: 271

    Tranny cooler lines

    Hello all. 68 289, c/4.
    I put a/c in the car recently and was wondering about the cooler lines that go to the bottom of the radiator. Im putting in a big block 24” radiator replacing the 20” standard. The tranny cooler fittings on the bottom of the radiator are different distances apart. The 20” radiator has 6” spacing while the 24 “ has 8”.  Do they sell the lines with different bends, or can i stretch and bend whats there to match?  Thanx

     

    9/07/2018 9:04 PM  #2

    MS
    Forum Originator

    Offline

    From: Canyon Lake, Texas
    Registered: 1/24/2013
    Posts: 12,304

    Re: Tranny cooler lines

    You can buy the steel tubing at any auto parts store. Use SAE inverted flare fittings and a brass union. Super easy to extend the one tube or just make a new one all the way to the tranny for about ten bucks.

    Or order a premade line from a 68 that came with small block and AC and C4 automatic.  It would have had the larger radiator.

    Money you enjoy wasting is NOT wasted money... unless your wife finds out.
     

    9/08/2018 8:15 AM  #3

    Mark Z
    FYI Addict

    Offline

    From: Dix Hills, NY
    Registered: 4/01/2013
    Posts: 160

    Re: Tranny cooler lines

    You can buy prebent lines. My 68 came with a c4 and 24 inch radiator.
    I sent you a PM

    Last edited by Mark Z (9/08/2018 8:18 AM)

     

     

    1 of 1

  • Index
  •  » FYI Ford, Classic Mustang Tech Discussion
  •  »  Tranny cooler lines

    • Board footera


    REMEMBER!!! When posting a question about your Mustang or other Ford on this forum, BE SURE to tell us what it is, what year, engine, etc so we have enough information to go on.