FYI FORD - MustangSteve's Ford Mustang Forum
The Internet's Most Knowledgeable Classic Mustang Information
IF YOU HAVE A QUESTION ABOUT CLASSIC FORD MUSTANGS, YOU HAVE COME TO THE RIGHT PLACE!
MustangSteve has over 30 years of Mustang experience, having owned 30 of them and restored several others. With the help of other Mustangers, this site is dedicated to helping anyone wanting to restore or modify their Mustang.... THERE ARE NO DUMB QUESTIONS!!!!!
Visit MustangSteve's web site to view some of my work and find details for:
FYIFORD Contributors' PICTURES - Power Brake Retrofit Kits for 65-66 Stangs - Classic Mustang FAQ's by MustangSteve - How to wire in a Duraspark Ignition - Mustang Ride Height Pictures and Descriptions - Steel Bushings to fit Granada Spindles to Mustang Tie Rods - Visit my EBAY store MustangSteve Performance - How to Install Granada Disc Brakes MustangSteve's Disc Brake Swap Page - FYIFORD Acronyms for guide to all the acronyms used on this page - FYIFORD Important information and upcoming events

You are not logged in. Would you like to login or register?

7/10/2013 5:45 AM  #1


Door window adjustment - 65 FB

I am having an issue with my driver's side window.  I don't think that it is going up far enough.  I loosened all the window stops but the window, I think, should go up about another 1/4" or so.  The passenger side seems to be higher based on visual appearance.  I even loosened the window regulator to see if there is any movement or adjustment gain from that but no luck.  The way it is I am not sure that I am getting a good seal on the gasket. What am I missing? Thanks.

 

7/10/2013 7:44 AM  #2


Re: Door window adjustment - 65 FB

Sometimes the lower window glass channel, under the glass, gets hung up on the beltline weatherstrip.


Money you enjoy wasting is NOT wasted money... unless your wife finds out.
 

7/10/2013 6:08 PM  #3


Re: Door window adjustment - 65 FB

Novi if it's not what MS stated, there is a stop for the up on the window but you have to remove the door panel and right under the door handle there are 2 bolts for adjustment. the bottom one is for the up stop and the top one is for the down stop. See photo, hope this helps   Mike


66 Vert.  4.6 DOHC, 4R70 Auto, Heidt's M2 frontend
 

Board footera


REMEMBER!!! When posting a question about your Mustang or other Ford on this forum, BE SURE to tell us what it is, what year, engine, etc so we have enough information to go on.