FYI FORD - MustangSteve's Ford Mustang Forum
The Internet's Most Knowledgeable Classic Mustang Information
IF YOU HAVE A QUESTION ABOUT CLASSIC FORD MUSTANGS, YOU HAVE COME TO THE RIGHT PLACE!
MustangSteve has over 30 years of Mustang experience, having owned 30 of them and restored several others. With the help of other Mustangers, this site is dedicated to helping anyone wanting to restore or modify their Mustang.... THERE ARE NO DUMB QUESTIONS!!!!!
Visit MustangSteve's web site to view some of my work and find details for:
FYIFORD Contributors' PICTURES - Power Brake Retrofit Kits for 65-66 Stangs - Classic Mustang FAQ's by MustangSteve - How to wire in a Duraspark Ignition - Mustang Ride Height Pictures and Descriptions - Steel Bushings to fit Granada Spindles to Mustang Tie Rods - Visit my EBAY store MustangSteve Performance - How to Install Granada Disc Brakes MustangSteve's Disc Brake Swap Page - FYIFORD Acronyms for guide to all the acronyms used on this page - FYIFORD Important information and upcoming events

You are not logged in. Would you like to login or register?

  • Index
  •  » FYI Ford, Classic Mustang Tech Discussion
  •  » 13” cobra & 86svo brakes after long wait

    • 1 of 1

       

    2/11/2019 4:04 AM  #1

    caveeagle
    FYI FORD Member

    Offline

    From: High Springs, FL
    Registered: 4/06/2013
    Posts: 43

    13” cobra & 86svo brakes after long wait

    Ok,, so procrastination has been a real problem.  But after >10 years and two moves, I a, finally about to install the disk brakes on my 67.

    I have Steve’s aluminum 13” cobra brackets and hardware kit for the fronts and the Ultrastang SVO brakes for the rear.   I am pretty close to haveimg all the parts for the install including a manual Disk/disk MC w a 1” bore and an adjustable prop valve.

    I am trying to find the Instructions for Steve”s conversion, but don’t seem to find it anywhere here.   

    The Ultrastang site is also long gone..  so any help for instructions for either conversion would be appreciated.

    I’m sure I will figure it out,   But I like to do my homework long before I start turning wrenches.   

    Thanks...

    Mark

     

    2/11/2019 11:53 AM  #2

    MS
    Forum Originator

    Offline

    From: Canyon Lake, Texas
    Registered: 1/24/2013
    Posts: 12,299

    Re: 13” cobra & 86svo brakes after long wait

    Glad you are back at it.  I emailed a copy of the instructions to you.  Plus a bit of trivia concerning the source of the aluminum.

    Money you enjoy wasting is NOT wasted money... unless your wife finds out.
     

     

    1 of 1

  • Index
  •  » FYI Ford, Classic Mustang Tech Discussion
  •  »  13” cobra & 86svo brakes after long wait

    • Board footera


    REMEMBER!!! When posting a question about your Mustang or other Ford on this forum, BE SURE to tell us what it is, what year, engine, etc so we have enough information to go on.