FYI FORD - MustangSteve's Ford Mustang Forum
The Internet's Most Knowledgeable Classic Mustang Information
IF YOU HAVE A QUESTION ABOUT CLASSIC FORD MUSTANGS, YOU HAVE COME TO THE RIGHT PLACE!
MustangSteve has over 30 years of Mustang experience, having owned 30 of them and restored several others. With the help of other Mustangers, this site is dedicated to helping anyone wanting to restore or modify their Mustang.... THERE ARE NO DUMB QUESTIONS!!!!!
Visit MustangSteve's web site to view some of my work and find details for:
FYIFORD Contributors' PICTURES - Power Brake Retrofit Kits for 65-66 Stangs - Classic Mustang FAQ's by MustangSteve - How to wire in a Duraspark Ignition - Mustang Ride Height Pictures and Descriptions - Steel Bushings to fit Granada Spindles to Mustang Tie Rods - Visit my EBAY store MustangSteve Performance - How to Install Granada Disc Brakes MustangSteve's Disc Brake Swap Page - FYIFORD Acronyms for guide to all the acronyms used on this page - FYIFORD Important information and upcoming events

You are not logged in. Would you like to login or register?

3/18/2019 12:26 PM  #1


Anyone know anything about Steve and Glenn at Steve's Mustang Parts

Anyone know anything about Steve and Glenn at Steve's Mustang Parts in Waller Tx. I have been trying to contact them. I wanted to see if they could weld repair my front passenger fender on 66 mustang. I used them to replace part of my floor pan and was very happy with the work. Stopped by there 2 weeks ago and the doors where locked. Sent an Email and no response. Try calling today and no answer. May drive out to their place tomorrow, again.

 

3/18/2019 1:08 PM  #2


Re: Anyone know anything about Steve and Glenn at Steve's Mustang Parts

Since Glen has "been under the weather"...I THINK they have temporarily put the business on hold. Hoping they can get it cranked-back-up soon.
6sally6


Get busy Liv'in or get busy Die'n....Host of the 2020 Bash at the Beach/The only Bash that got cancelled  )8
 

3/18/2019 1:49 PM  #3


Re: Anyone know anything about Steve and Glenn at Steve's Mustang Parts

Thanks 6sally6 for info. Lets all hope for a speedy and Full recovery. I would like to use them for repair
Thanks again for info

     Thread Starter
 

3/18/2019 2:58 PM  #4


Re: Anyone know anything about Steve and Glenn at Steve's Mustang Parts

Leave a message on the SMP phone #, I'm pretty sure Steve or Glen will get back to you.  I know they have been doing some work but I think it's sort of spotty right now.  I left Steve a message a month ago and he got back to me in a day or so.  Be sure to let him know who you are and what you need.

BB


"you get what you pay for, good work isn't cheap, and there are NO free lunches...PERIOD!"
 

3/18/2019 7:57 PM  #5


Re: Anyone know anything about Steve and Glenn at Steve's Mustang Parts

Try to call on Saturday morning between 8 and 12. One or both will usually be in the shop. You can try to send a message through their Facebook page.


John  -- 67 Mustang Coupe 390 5 speed
 

Board footera


REMEMBER!!! When posting a question about your Mustang or other Ford on this forum, BE SURE to tell us what it is, what year, engine, etc so we have enough information to go on.