| ||
Visit MustangSteve's web site to view some of my work and find details for: FYIFORD Contributors' PICTURES - Power Brake Retrofit Kits for 65-66 Stangs - Classic Mustang FAQ's by MustangSteve - How to wire in a Duraspark Ignition - Mustang Ride Height Pictures and Descriptions - Steel Bushings to fit Granada Spindles to Mustang Tie Rods - Visit my EBAY store MustangSteve Performance - How to Install Granada Disc Brakes MustangSteve's Disc Brake Swap Page - FYIFORD Acronyms for guide to all the acronyms used on this page - FYIFORD Important information and upcoming events |
1 of 1
Offline
Trying to install a power top and need a shot of how the circuit breaker mounts to the solenoid with the starter cable. Thanks in advance.
Offline
I just installed mine yesterday but don't have any pics at the moment.
Take a look at this page, about half way down, there is a very good pic of what you are looking for. I mounted mine the same way.
Offline
Mine is mounted the same way on my 70 except the CB is reversed on the brass mount and the studs on the CB are a little bit shorter.
Offline
Just what I was looking for, Thanks!
1 of 1
REMEMBER!!! When posting a question about your Mustang or other Ford on this forum, BE SURE to tell us what it is, what year, engine, etc so we have enough information to go on. |