FYI FORD - MustangSteve's Ford Mustang Forum
The Internet's Most Knowledgeable Classic Mustang Information
IF YOU HAVE A QUESTION ABOUT CLASSIC FORD MUSTANGS, YOU HAVE COME TO THE RIGHT PLACE!
MustangSteve has over 30 years of Mustang experience, having owned 30 of them and restored several others. With the help of other Mustangers, this site is dedicated to helping anyone wanting to restore or modify their Mustang.... THERE ARE NO DUMB QUESTIONS!!!!!
Visit MustangSteve's web site to view some of my work and find details for:
FYIFORD Contributors' PICTURES - Power Brake Retrofit Kits for 65-66 Stangs - Classic Mustang FAQ's by MustangSteve - How to wire in a Duraspark Ignition - Mustang Ride Height Pictures and Descriptions - Steel Bushings to fit Granada Spindles to Mustang Tie Rods - Visit my EBAY store MustangSteve Performance - How to Install Granada Disc Brakes MustangSteve's Disc Brake Swap Page - FYIFORD Acronyms for guide to all the acronyms used on this page - FYIFORD Important information and upcoming events

You are not logged in. Would you like to login or register?

  • Index
  •  » FYI Ford, Classic Mustang Tech Discussion
  •  » What kind of primer to use...

    • 1 of 1

       

    4/05/2013 10:08 PM  #1

    mustangJoe
    FYI FORD Member

    Offline

    Registered: 4/01/2013
    Posts: 27

    What kind of primer to use...

    What kind of primer do I use after welding on a new part. I am going to be painting it later. Does it matter if it is on the interior or exterior?

     

    4/06/2013 6:18 AM  #2

    jerseyjoe
    I FYI 24-7

    Offline

    Registered: 4/01/2013
    Posts: 789

    Re: What kind of primer to use...

    Hey Joe, I have replaced alot of sheetmetal on my new Mach 1 project and only used  a 2K or epoxy primer...Eastwood has a rattle can 2K which is helpful for small jobs.You need to be down to the bare metal before applying primer. Some 2k and most all Epoxy primer can be bondoe'd over by first scuffing it, Clean all areas first with a wax/surface cleaner before priming...Use resperator mask when working with any of these materials and keep the resperator in a large baggy when not used to prolong its life.....jj

    "Never put a question mark where God put a period "  Richard Petty
     

    4/07/2013 7:58 PM  #3

    mustangJoe
    FYI FORD Member

    Offline

    Registered: 4/01/2013
    Posts: 27

    Re: What kind of primer to use...

    Thank you, do you apply the epoxy primer with a spray gun? If so what kind do you recommend?

       •Thread Starter
     

     

    1 of 1

  • Index
  •  » FYI Ford, Classic Mustang Tech Discussion
  •  »  What kind of primer to use...

    • Board footera


    REMEMBER!!! When posting a question about your Mustang or other Ford on this forum, BE SURE to tell us what it is, what year, engine, etc so we have enough information to go on.