FYI FORD - MustangSteve's Ford Mustang Forum
The Internet's Most Knowledgeable Classic Mustang Information
MustangSteve has over 30 years of Mustang experience, having owned 30 of them and restored several others. With the help of other Mustangers, this site is dedicated to helping anyone wanting to restore or modify their Mustang.... THERE ARE NO DUMB QUESTIONS!!!!!
Visit MustangSteve's web site to view some of my work and find details for:
FYIFORD Contributors' PICTURES - Power Brake Retrofit Kits for 65-66 Stangs - Classic Mustang FAQ's by MustangSteve - How to wire in a Duraspark Ignition - Mustang Ride Height Pictures and Descriptions - Steel Bushings to fit Granada Spindles to Mustang Tie Rods - Visit my EBAY store MustangSteve Performance - How to Install Granada Disc Brakes MustangSteve's Disc Brake Swap Page - FYIFORD Acronyms for guide to all the acronyms used on this page - FYIFORD Important information and upcoming events

You are not logged in. Would you like to login or register?

6/19/2019 9:41 AM  #1

71-73 Mustang quarter panel patching - made a video.

I finally tackled patching the quarter panels on my 71.  Tried to capture the important bits on video.  Missed the fact that I put a ton of seam sealer between the outer wheelhouse and the patch once I was 100% on the fit and tacked it together.



7/14/2019 8:40 PM  #2

Re: 71-73 Mustang quarter panel patching - made a video.

Decided to swap out the tail panel.

As usual the repop parts are more of a kit to make what you need than actually what you need...

Had to battle the valance a bit to get it close enough.

     Thread Starter

7/18/2019 12:43 PM  #3

Re: 71-73 Mustang quarter panel patching - made a video.

Nice work! Thanks for the vid


Board footera

REMEMBER!!! When posting a question about your Mustang or other Ford on this forum, BE SURE to tell us what it is, what year, engine, etc so we have enough information to go on.