FYI FORD - MustangSteve's Ford Mustang Forum
The Internet's Most Knowledgeable Classic Mustang Information
IF YOU HAVE A QUESTION ABOUT CLASSIC FORD MUSTANGS, YOU HAVE COME TO THE RIGHT PLACE!
MustangSteve has over 30 years of Mustang experience, having owned 30 of them and restored several others. With the help of other Mustangers, this site is dedicated to helping anyone wanting to restore or modify their Mustang.... THERE ARE NO DUMB QUESTIONS!!!!!
Visit MustangSteve's web site to view some of my work and find details for:
FYIFORD Contributors' PICTURES - Power Brake Retrofit Kits for 65-66 Stangs - Classic Mustang FAQ's by MustangSteve - How to wire in a Duraspark Ignition - Mustang Ride Height Pictures and Descriptions - Steel Bushings to fit Granada Spindles to Mustang Tie Rods - Visit my EBAY store MustangSteve Performance - How to Install Granada Disc Brakes MustangSteve's Disc Brake Swap Page - FYIFORD Acronyms for guide to all the acronyms used on this page - FYIFORD Important information and upcoming events

You are not logged in. Would you like to login or register?

7/27/2019 9:52 AM  #26


Re: 2011 seats arrived.

Bullet Bob wrote:

Really great to hear, Gary.  My friends put the 2011 seats in the Falcon Project and they are great.  Were you able to keep any of the power features?  I always heard that the seats would be too high in a Mustang with the power features installed.

Now, a little AC and cruise control and you'll have a class A cruiser.

I'll be in touch to discuss the trip to Bash 17 next year.

BB
 

Bob,

The AC is next on the list and she has cruise control. The power features of the 2011 seat consume quite a bit of space and will not work with the stock 67 seat platform. Major surgery would need to be done to get the power options working. Mine are non power now except for the lumbar support.

Gary


Gary Zilik - Pine Junction, Colorado - 67 Coupe, 289-4V, T5
 

7/27/2019 2:20 PM  #27


Re: 2011 seats arrived.

Question about installing the 67 tracks on the ‘11 seats...

Did you drill holes in the 67 tracks to match the mounting holes in the seats or did you drill/tap new holes in the seats to match the bolt holes in the 67 tracks?

 

7/28/2019 9:00 AM  #28


Re: 2011 seats arrived.

Well, you can ignore my above question. I just pulled the power tracks off the '06 seats and the seats don't really fit in the convertible. Even without the new tracks bolted on, they won't sit flush on the floorpan. The sides are hitting the tunnel and the rockers.  . I guess I'll save them for the next project and its back to the drawing board for the 64.5 vert.

 

Board footera


REMEMBER!!! When posting a question about your Mustang or other Ford on this forum, BE SURE to tell us what it is, what year, engine, etc so we have enough information to go on.