Looking at buying plug wires I can cut to fit and purchase the plug wire holders that mount to the valve cover bolts. Looking for recommendations for both the wires and holders. Post pictures if you have a clean setup like this.
I've had great luck over the years with MSD. Just be aware they are 8.5mm I believe. The wire is too big for a lot of plug wire holders without modification. Usually you can just overbore the holes if needed, or use some heat to tweak the clip size depending on the style of holder.
I think I used Taylor wires on my '67 though, because they came black with black ends and I wanted them to look stock. The MSDs I think only come with gray ends.
I've had great luck over the years with MSD. Just be aware they are 8.5mm I believe. The wire is too big for a lot of plug wire holders without modification. Usually you can just overbore the holes if needed, or use some heat to tweak the clip size depending on the style of holder.
I think I used Taylor wires on my '67 though, because they came black with black ends and I wanted them to look stock. The MSDs I think only come with gray ends.
I think I read something about the size of the MSD wires. I’ll look getting them and what holders will fit my needs and tastes.
TKOPerformance wrote:
