FYI FORD - MustangSteve's Ford Mustang Forum
The Internet's Most Knowledgeable Classic Mustang Information
IF YOU HAVE A QUESTION ABOUT CLASSIC FORD MUSTANGS, YOU HAVE COME TO THE RIGHT PLACE!
MustangSteve has over 30 years of Mustang experience, having owned 30 of them and restored several others. With the help of other Mustangers, this site is dedicated to helping anyone wanting to restore or modify their Mustang.... THERE ARE NO DUMB QUESTIONS!!!!!
Visit MustangSteve's web site to view some of my work and find details for:
FYIFORD Contributors' PICTURES - Power Brake Retrofit Kits for 65-66 Stangs - Classic Mustang FAQ's by MustangSteve - How to wire in a Duraspark Ignition - Mustang Ride Height Pictures and Descriptions - Steel Bushings to fit Granada Spindles to Mustang Tie Rods - Visit my EBAY store MustangSteve Performance - How to Install Granada Disc Brakes MustangSteve's Disc Brake Swap Page - FYIFORD Acronyms for guide to all the acronyms used on this page - FYIFORD Important information and upcoming events

You are not logged in. Would you like to login or register?

12/13/2018 11:05 AM  #1


Wheels

Hello
I have a 1978 mustang 2 with a 2.8 engine and I am having a hard time to find 15 in wheels to fit the 4 bolt hubs.
Thanks

 

12/13/2018 1:43 PM  #2


Re: Wheels

Brian wrote:

Hello
I have a 1978 mustang 2 with a 2.8 engine and I am having a hard time to find 15 in wheels to fit the 4 bolt hubs.
Thanks

Good luck!  Not sure they made them.   You might try the after market like Stockton Wheel.

And welcome to the forum.  Not a lot of M2 owners here, but we aim to help anyone who asks.

Last edited by lowercasesteve (12/13/2018 1:44 PM)


Original owner - 351w,T-5, 4whl disks, power R&P
 

12/13/2018 10:01 PM  #3


Re: Wheels

Legendary Wheels shows a 4 lug 15x6 wheel in 4 on 4.25".

 

12/14/2018 6:11 PM  #4


Re: Wheels

If they are 4 on 4.25" (also referenced as 108mm) there should be a lot of selections.  That was the Fox Mustang bolt pattern too.  Now, the width and offset may be a challenge, as I've no idea what that should be for a MII.  I know I have a set of 4 lug Fox wheels in the shop that are either 15" or 16", and I'm guessing in the 7-8" width range.  Not sure exactly what they are; they were on the car when I bought it.  I've since converted to 5 lug and Cobra R wheels, so they're just sitting there...

 

Board footera


REMEMBER!!! When posting a question about your Mustang or other Ford on this forum, BE SURE to tell us what it is, what year, engine, etc so we have enough information to go on.