| ||
Visit MustangSteve's web site to view some of my work and find details for: FYIFORD Contributors' PICTURES - Power Brake Retrofit Kits for 65-66 Stangs - Classic Mustang FAQ's by MustangSteve - How to wire in a Duraspark Ignition - Mustang Ride Height Pictures and Descriptions - Steel Bushings to fit Granada Spindles to Mustang Tie Rods - Visit my EBAY store MustangSteve Performance - How to Install Granada Disc Brakes MustangSteve's Disc Brake Swap Page - FYIFORD Acronyms for guide to all the acronyms used on this page - FYIFORD Important information and upcoming events |
1 of 1
Offline
I am finally getting to plumbing the brakes in my project. I'm using the PB-6.2 aluminum master cylinder with metric bubble flare fittings. The front port uses a 10mm nut, the rear port uses a 12mm nut. The question is which port goes to which brakes?
Front port to front brakes - rear port to rear brakes?
or...
Front port to rear brakes - rear port to front brakes?
Thanks,
Peter
Offline
Pictures just for the sake of pictures.
Offline
The forward port goes to the rear brakes. The mc you have there... was it purchased from MustangSteve?
It is the wrong one and would be better if replaced. If we sold it, it can be exchanged for correct on having 10mm threads on both fittings.
Offline
I'm about 95% sure it was purchased from Mustang Steve about a decade ago.
I've got the 12mm bubble flare nut to use on 3/16" line, so it isn't a big deal unless there is something else different about it.
Thanks!
Peter
Offline
That mc is designed for cars with traction control option. Not sure what internal parts might be different, but there must be some since they use different fittings and part number. We have never sold that particular master cylinder. The sloped tank akes me think it is probably some other master cylinder. The 2000 Mustang uses a tank with a flatter top.
1 of 1
REMEMBER!!! When posting a question about your Mustang or other Ford on this forum, BE SURE to tell us what it is, what year, engine, etc so we have enough information to go on. |