FYI FORD - MustangSteve's Ford Mustang Forum
The Internet's Most Knowledgeable Classic Mustang Information
IF YOU HAVE A QUESTION ABOUT CLASSIC FORD MUSTANGS, YOU HAVE COME TO THE RIGHT PLACE!
MustangSteve has over 30 years of Mustang experience, having owned 30 of them and restored several others. With the help of other Mustangers, this site is dedicated to helping anyone wanting to restore or modify their Mustang.... THERE ARE NO DUMB QUESTIONS!!!!!
Visit MustangSteve's web site to view some of my work and find details for:
FYIFORD Contributors' PICTURES - Power Brake Retrofit Kits for 65-66 Stangs - Classic Mustang FAQ's by MustangSteve - How to wire in a Duraspark Ignition - Mustang Ride Height Pictures and Descriptions - Steel Bushings to fit Granada Spindles to Mustang Tie Rods - Visit my EBAY store MustangSteve Performance - How to Install Granada Disc Brakes MustangSteve's Disc Brake Swap Page - FYIFORD Acronyms for guide to all the acronyms used on this page - FYIFORD Important information and upcoming events

You are not logged in. Would you like to login or register?

7/03/2020 7:11 AM  #1


Mag Light APP

I’ve been using an APP (I phone)  several years now and is quite useful.

This is how I have used it:

Flashlight with variable intensity
Magnifying glass with variable zoom
Camera with or without light on

Best part, you can turn on light to view in dark place, magnify, and then take a picture.

Also blindly take a pictures where you can’t even get your head or sometimes hand into.
I use it a lot at work and home...darn old age.

Sometimes I wish I could change location of camera button due to location of light to get into tight spaces.

 

7/03/2020 9:31 AM  #2


Re: Mag Light APP

I too have found it a very useful app.


Gary Zilik - Pine Junction, Colorado - 67 Coupe, 289-4V, T5
 

7/03/2020 3:45 PM  #3


Re: Mag Light APP

I had a genius idea for an app some years ago.  It would turn the phone into a looking glass with your eyeglass prescription.  A buddy of mine who is super tech savy and I looked into it, but unfortunately the technology isn't there yet.  The current screens are flat and can't be set up to act curved.  I was heartened that a group at MIT is working on a screen that would allow you to do that.  Oh well, so much for my get rich quick scheme...

 

7/04/2020 1:11 PM  #4


Re: Mag Light APP

Nos681 wrote:

I’ve been using an APP (I phone) several years now and is quite useful.

This is how I have used it:

Flashlight with variable intensity
Magnifying glass with variable zoom
Camera with or without light on

Best part, you can turn on light to view in dark place, magnify, and then take a picture.

Also blindly take a pictures where you can’t even get your head or sometimes hand into.
I use it a lot at work and home...darn old age.

Sometimes I wish I could change location of camera button due to location of light to get into tight spaces.

Try using the camera's timer to take pictures in tight spaces where you have difficulty getting you finger on the button. 


65 Fastback, 351W, 5-speed, 4 wheel discs, 9" rear,  R&C Front End.
 

7/04/2020 2:33 PM  #5


Re: Mag Light APP

I've found taking a video of the area I'm inspecting, then using screenshots from the video helpful. My pics only in difficult areas rarely results in useful pics.


Bob. 69 Mach 1, 393W, SMOD Toploader, Armstrong  steering, factory AC.
 

7/04/2020 7:47 PM  #6


Re: Mag Light APP

I've used it to find p/n and s/n's to look behind the instrument panel in the movie mode on several airplanes. Don't have to remove instruments anymore to get needed info. Also used it to trace wires under the instrument panel on the Mustang for the cruise control.


70, ragtop 351W/416 stroker Edel Performer heads w pro flow 4, Comp roller 35-421-8. T5
 

7/04/2020 7:48 PM  #7


Re: Mag Light APP

I've used it to find p/n and s/n's to look behind the instrument panel in the movie mode on several airplanes. Don't have to remove instruments anymore to get needed info. Also used it to trace wires under the instrument panel on the Mustang for the cruise control.


70, ragtop 351W/416 stroker Edel Performer heads w pro flow 4, Comp roller 35-421-8. T5
 

Board footera


REMEMBER!!! When posting a question about your Mustang or other Ford on this forum, BE SURE to tell us what it is, what year, engine, etc so we have enough information to go on.