FYI FORD - MustangSteve's Ford Mustang Forum
The Internet's Most Knowledgeable Classic Mustang Information
IF YOU HAVE A QUESTION ABOUT CLASSIC FORD MUSTANGS, YOU HAVE COME TO THE RIGHT PLACE!
MustangSteve has over 30 years of Mustang experience, having owned 30 of them and restored several others. With the help of other Mustangers, this site is dedicated to helping anyone wanting to restore or modify their Mustang.... THERE ARE NO DUMB QUESTIONS!!!!!
Visit MustangSteve's web site to view some of my work and find details for:
FYIFORD Contributors' PICTURES - Power Brake Retrofit Kits for 65-66 Stangs - Classic Mustang FAQ's by MustangSteve - How to wire in a Duraspark Ignition - Mustang Ride Height Pictures and Descriptions - Steel Bushings to fit Granada Spindles to Mustang Tie Rods - Visit my EBAY store MustangSteve Performance - How to Install Granada Disc Brakes MustangSteve's Disc Brake Swap Page - FYIFORD Acronyms for guide to all the acronyms used on this page - FYIFORD Important information and upcoming events

You are not logged in. Would you like to login or register?

  • Index
  •  » FYI Ford, Classic Mustang Tech Discussion
  •  » Ford 302 serpentine belt routing.

    • 1 of 1

       

    7/23/2020 8:27 PM  #1

    66rusty
    FYI FORD Member

    Offline

    From: Winnipeg, Manitoba
    Registered: 5/12/2020
    Posts: 17

    Ford 302 serpentine belt routing.

    Hey, looking for a clean solution for serpentine belt routing.  Accessories are Alternator and reverse rotation water pump.  Years ago I bought the bullies, and alternator bracket with tensions with SMOG pump delete kit from Blue oval industries way back when.  Just getting ready to install it, but can't find any instructions.  I remember looking at this forum years ago and bought something that was similar to what someone had done on this forum.  Any pics or ideas are welcome.  

     

     

    7/24/2020 5:22 AM  #2

    TKOPerformance
    Hyper FYIFORD ADDICT

    Offline

    From: Newark, DE
    Registered: 12/15/2014
    Posts: 7,504

    Re: Ford 302 serpentine belt routing.

    What brackets are you using?  Fox Mustang stuff?

     

    7/24/2020 2:59 PM  #3

    BobE
    Senior 24-7 FYI Addict

    Offline

    From: White Plains, NY
    Registered: 4/04/2013
    Posts: 2,654

    Re: Ford 302 serpentine belt routing.

    Suggest checking out "Late Model Restoration" website, they have several schematics of belt routing ... 
    https://lmr.com/1979-93-MustangTe\\

    65 Fastback, 351W, 5-speed, 4 wheel discs, 9" rear,  R&C Front End.
     

    7/24/2020 9:53 PM  #4

    50vert
    Senior 24-7 FYI Addict

    Offline

    From: QLD Australia
    Registered: 4/01/2013
    Posts: 1,427

    Re: Ford 302 serpentine belt routing.

    If you're using the brackets from the 93 T-bird, they are the same as 94-95 mustang.
    To use the reverse rotation water pump, you'll need a 94-95 P/S eliminator pulley. Or a 6 rib idler pulley. No need for the Smog eliminator pulley, just use a shorter belt.
    Edit, I don't think a 94-95 P/S eliminator pulley is made.

    Last edited by 50vert (7/25/2020 12:10 AM)

    "Those telephone poles were like a picket fence"
     

    7/25/2020 8:49 AM  #5

    MS
    Forum Originator

    Offline

    From: Canyon Lake, Texas
    Registered: 1/24/2013
    Posts: 12,267

    Re: Ford 302 serpentine belt routing.


    Money you enjoy wasting is NOT wasted money... unless your wife finds out.
     

    7/27/2020 3:11 PM  #6

    Steve69
    Senior 24-7 FYI Addict

    Offline

    From: Madison Wisconsin
    Registered: 4/01/2013
    Posts: 2,739

    Re: Ford 302 serpentine belt routing.

     

    7/28/2020 6:57 PM  #7

    66rusty
    FYI FORD Member

    Offline

    From: Winnipeg, Manitoba
    Registered: 5/12/2020
    Posts: 17

    Re: Ford 302 serpentine belt routing.

    Awesome thanks guys!!!!!
     

       •Thread Starter
     

    7/28/2020 7:48 PM  #8

    zed
    Active Member

    Offline

    Registered: 2/23/2020
    Posts: 5

    Re: Ford 302 serpentine belt routing.

    Steve69, in your engine bay picture, what are you using for the upper radiator hose? I can't recall what hose I used but mine comes across the front of the alternator. Thanks

     

    7/30/2020 7:59 PM  #9

    Steve69
    Senior 24-7 FYI Addict

    Offline

    From: Madison Wisconsin
    Registered: 4/01/2013
    Posts: 2,739

    Re: Ford 302 serpentine belt routing.

    zed wrote:

    Steve69, in your engine bay picture, what are you using for the upper radiator hose? I can't recall what hose I used but mine comes across the front of the alternator. Thanks

       I have a 5.0 foxbody radiator and upper hose. 
     

     

    7/30/2020 9:07 PM  #10

    Nos681
    Senior 24-7 FYI Addict

    Online!

    From: Atlantic Mine, Michigan
    Registered: 7/14/2016
    Posts: 3,336

    Re: Ford 302 serpentine belt routing.

    MS wrote:


    Steve, What accessory setup is that originally modified from?

    Last edited by Nos681 (7/30/2020 9:14 PM)

     

    7/31/2020 6:30 AM  #11

    MS
    Forum Originator

    Offline

    From: Canyon Lake, Texas
    Registered: 1/24/2013
    Posts: 12,267

    Re: Ford 302 serpentine belt routing.

    The setup pictured is from an  89 Lincoln Mark VII.  Other than some minor bracket and pulley size differences is same as foxbody.

    Belt size chart is foxbody.  Same stuff, basically.

    Money you enjoy wasting is NOT wasted money... unless your wife finds out.
     

     

    1 of 1

  • Index
  •  » FYI Ford, Classic Mustang Tech Discussion
  •  »  Ford 302 serpentine belt routing.

    • Board footera


    REMEMBER!!! When posting a question about your Mustang or other Ford on this forum, BE SURE to tell us what it is, what year, engine, etc so we have enough information to go on.