| ||
Visit MustangSteve's web site to view some of my work and find details for: FYIFORD Contributors' PICTURES - Power Brake Retrofit Kits for 65-66 Stangs - Classic Mustang FAQ's by MustangSteve - How to wire in a Duraspark Ignition - Mustang Ride Height Pictures and Descriptions - Steel Bushings to fit Granada Spindles to Mustang Tie Rods - Visit my EBAY store MustangSteve Performance - How to Install Granada Disc Brakes MustangSteve's Disc Brake Swap Page - FYIFORD Acronyms for guide to all the acronyms used on this page - FYIFORD Important information and upcoming events |
1 of 1
Offline
This is Joe... I talked to somebody at Eds just before I was leaving talking about how I needed to adjust my clutch. I didn't get your number or name. I think you said you were close to Houston area near Charles.... but you said you'd rebuilt a bunch of T5s and struggling to get into first means I was wearing out the synchronizer.
Anyway, send me your contact. I want to give you a call. I'm going to try and mess with the clutch tomorrow.
Last edited by TremendousWand (5/24/2021 2:21 PM)
Offline
Glen
Offline
TremendousWand wrote:
This is Joe... I talked to somebody at Eds just before I was leaving talking about how I needed to adjust my clutch. I didn't get your number or name. I think you said you were close to Houston area near Charles.... but you said you'd rebuilt a bunch of T5s and struggling to get into first means I was wearing out the synchronizer.
Anyway, send me your contact. I want to give you a call. I'm going to try and mess with the clutch tomorrow.
Owner of stevesmustangparts.com
Offline
Struggling to get into first to me would mean an improperly adjusted clutch (i.e. the clutch isn't fully disengaging). This won't wear the synchronizer so much as it will wear/damage the engagement teeth on 1st gear and the 1/2 slidjng sleeve.
Offline
I agree with you. First thing to check is for complete clutch disengagement.
Offline
It was me. Glen's 1965.5.0. PM Sent.
1 of 1
REMEMBER!!! When posting a question about your Mustang or other Ford on this forum, BE SURE to tell us what it is, what year, engine, etc so we have enough information to go on. |