FYI FORD - MustangSteve's Ford Mustang Forum
The Internet's Most Knowledgeable Classic Mustang Information
IF YOU HAVE A QUESTION ABOUT CLASSIC FORD MUSTANGS, YOU HAVE COME TO THE RIGHT PLACE!
MustangSteve has over 30 years of Mustang experience, having owned 30 of them and restored several others. With the help of other Mustangers, this site is dedicated to helping anyone wanting to restore or modify their Mustang.... THERE ARE NO DUMB QUESTIONS!!!!!
Visit MustangSteve's web site to view some of my work and find details for:
FYIFORD Contributors' PICTURES - Power Brake Retrofit Kits for 65-66 Stangs - Classic Mustang FAQ's by MustangSteve - How to wire in a Duraspark Ignition - Mustang Ride Height Pictures and Descriptions - Steel Bushings to fit Granada Spindles to Mustang Tie Rods - Visit my EBAY store MustangSteve Performance - How to Install Granada Disc Brakes MustangSteve's Disc Brake Swap Page - FYIFORD Acronyms for guide to all the acronyms used on this page - FYIFORD Important information and upcoming events

You are not logged in. Would you like to login or register?

4/23/2022 4:04 PM  #1


Disc brake conversion and rear swap complete

My 68 Cougar XR7 received a good upgrade, thank you Steve for all the help. I now have a 66 Mustang 8" Trak-Lok with 3:25 gear and 2015 Mustang rear disc brakes. Pretty easy when someone else assembled the rear for me. Nice change from the original peg-leg 3:00 gears and drums. Also finished the parking brake mods using 2015 cables and new section to still use the factory handle and hardware.
Still have to adjust the bias to the rear a bit but my cat is running great. Haven't done a burnout yet but that is why I wanted the trak-lok to keep them planted.


68 Cougar XR7 347 stroker T5
 

4/24/2022 8:42 AM  #2


Re: Disc brake conversion and rear swap complete

Glad to see you are making progress on the Cougar.
Now, for some big front brakes.


Money you enjoy wasting is NOT wasted money... unless your wife finds out.
 

4/24/2022 8:57 AM  #3


Re: Disc brake conversion and rear swap complete

Please share details of your parking brake install.
Sounds like a nice combination.

 

4/24/2022 1:09 PM  #4


Re: Disc brake conversion and rear swap complete

Mustang steve kit using the 2015 disc brakes on an 8" rear. Bought a left and fight stock 2015 parking brake cables from Rockauto. They come with multiple brackets on each cable and I only cut off 2 on each. I routed them toward the stock 1968 e brake hardware. I also purchased a Dorman ebrake cable kit and used the unions in the kit and cut the cable to fit and tightened a cable stop on one end I shortened. Tightened and adjusted it . Parking brake works.
If I could post pics I would take some pics.
 


68 Cougar XR7 347 stroker T5
     Thread Starter
 

4/24/2022 8:18 PM  #5


Re: Disc brake conversion and rear swap complete

You can post pics…


Money you enjoy wasting is NOT wasted money... unless your wife finds out.
 

4/25/2022 2:22 PM  #6


Re: Disc brake conversion and rear swap complete

What are the cable lengths and cable sheath lengths?

 

5/15/2022 9:25 PM  #7


Re: Disc brake conversion and rear swap complete

Would like to see pictures of this.
 


Its really me....I fixed my caps lock .
 

5/16/2022 5:03 AM  #8


Re: Disc brake conversion and rear swap complete

Billy, here is my setup on the 65.
It’s in the Tips and How To’s section.

https://fyi.boardhost.com/viewtopic.php?id=10480

I used 97-02 Escort brake cables.
I believe that some cables have a retaining clip to locate the caliper end bracket.
One of those might be easier to modify, no welding required on cable end…possibly.
I also removed the extra cable brackets as needed too.
The Escort loop is larger than is needed, a simple zip tie prevents the loop from falling off the caliper park lever.
I crimped 2 cable stops per end for peace of mind and mimic length of a factory cable stop…this is a parking brake.

 

5/16/2022 3:22 PM  #9


Re: Disc brake conversion and rear swap complete

Awesome.


Its really me....I fixed my caps lock .
 

Board footera


REMEMBER!!! When posting a question about your Mustang or other Ford on this forum, BE SURE to tell us what it is, what year, engine, etc so we have enough information to go on.