FYI FORD - MustangSteve's Ford Mustang Forum
The Internet's Most Knowledgeable Classic Mustang Information
IF YOU HAVE A QUESTION ABOUT CLASSIC FORD MUSTANGS, YOU HAVE COME TO THE RIGHT PLACE!
MustangSteve has over 30 years of Mustang experience, having owned 30 of them and restored several others. With the help of other Mustangers, this site is dedicated to helping anyone wanting to restore or modify their Mustang.... THERE ARE NO DUMB QUESTIONS!!!!!
Visit MustangSteve's web site to view some of my work and find details for:
FYIFORD Contributors' PICTURES - Power Brake Retrofit Kits for 65-66 Stangs - Classic Mustang FAQ's by MustangSteve - How to wire in a Duraspark Ignition - Mustang Ride Height Pictures and Descriptions - Steel Bushings to fit Granada Spindles to Mustang Tie Rods - Visit my EBAY store MustangSteve Performance - How to Install Granada Disc Brakes MustangSteve's Disc Brake Swap Page - FYIFORD Acronyms for guide to all the acronyms used on this page - FYIFORD Important information and upcoming events

You are not logged in. Would you like to login or register?

  • Index
  •  » FYI Ford, Classic Mustang Tech Discussion
  •  » Any suggestions for alternator only brackets for serpentine belt

    • 1 of 1

       

    4/26/2023 7:52 PM  #1

    Steve69
    Senior 24-7 FYI Addict

    Offline

    From: Madison Wisconsin
    Registered: 4/01/2013
    Posts: 2,730

    Any suggestions for alternator only brackets for serpentine belt

    For 351W.  Currently have a reverse rotation pump.  With the EPS steering we didn’t need the power steering pump anymore.  Thanks!




     

    4/27/2023 9:01 AM  #2

    Raymond_B
    Senior 24-7 FYI Addict

    Offline

    From: Fort Worth, TX
    Registered: 4/01/2013
    Posts: 1,193

    Re: Any suggestions for alternator only brackets for serpentine belt

    That looks like a truck alternator/tensioner mount. If so, be sure to check the tensioner bolt and its associated threads in the bracket. The truck stuff is notorious for that bolt either breaking or coming loose and messing up the threads or both!

    Also meant to ask, what is the sensor in the tstat housing? I am sure you know, but that is on the otherside of the t-stat and will not read correctly until the tstat opens?? 

    Last edited by Raymond_B (4/27/2023 9:08 AM)

     

    4/27/2023 10:02 AM  #3

    BobE
    Senior 24-7 FYI Addict

    Offline

    From: White Plains, NY
    Registered: 4/04/2013
    Posts: 2,625

    Re: Any suggestions for alternator only brackets for serpentine belt

    Steve69 - you may want to check out LMR, they have info on serpentine belts arrangements that may help.
    https://lmr.com/?gclid=EAIaIQobChMI-rjxkbfK_gIVJQtlCh1LjgtAEAAYASAAEgLJNvD_BwE
     

    65 Fastback, 351W, 5-speed, 4 wheel discs, 9" rear,  R&C Front End.
     

    4/27/2023 10:38 AM  #4

    6sally6
    Hyper FYIFORD ADDICT

    Offline

    From: Surfside Beach,SC
    Registered: 4/02/2013
    Posts: 6,820

    Re: Any suggestions for alternator only brackets for serpentine belt

    Just curious.......what all will be driven off the crank pulley ?
    Eliminating any more non-essentials things?! (smog pump...AC...ect.)
    6sal6

    Get busy Liv'in or get busy Die'n....Host of the 2020 Bash at the Beach/The only Bash that got cancelled  )8
     

    4/27/2023 11:19 AM  #5

    Raymond_B
    Senior 24-7 FYI Addict

    Offline

    From: Fort Worth, TX
    Registered: 4/01/2013
    Posts: 1,193

    Re: Any suggestions for alternator only brackets for serpentine belt

    I meant to ask, would you consider an option to use an earlier style timing cover and standard rotation water pump? Might make things a bit easier.

     

    4/27/2023 4:45 PM  #6

    50vert
    Senior 24-7 FYI Addict

    Offline

    From: QLD Australia
    Registered: 4/01/2013
    Posts: 1,419

    Re: Any suggestions for alternator only brackets for serpentine belt

    Can you get a P/S or A/c delete pulley for whatever the original application was?
    Or with a water pump and timing cover change, and probably a conversion balancer. It would need a 3G with 12 and 6 mounting ears.
    https://www.cvfracing.com/ford-289-302-351w-serpentine-conversion-kit-alternator-only/
     

    Last edited by 50vert (4/27/2023 4:48 PM)

    "Those telephone poles were like a picket fence"
     

    4/29/2023 9:17 PM  #7

    MS
    Forum Originator

    Online!

    From: Canyon Lake, Texas
    Registered: 1/24/2013
    Posts: 12,220

    Re: Any suggestions for alternator only brackets for serpentine belt

    To simplify things, a 69 alternator bracket and a normal rotation water pump would be my choice.  A single v-belt would do the job, or same setup using multi-groove pulleys for a six groove serpentine belt would be simple and effective.

    Also, if anyone has an extra foxbody power steering pump snd mounting brackrt laying around, I need one for a fox serpentine stdtem I have, but is missing the pump.

    Money you enjoy wasting is NOT wasted money... unless your wife finds out.
     

    4/30/2023 8:33 AM  #8

    Steve69
    Senior 24-7 FYI Addict

    Offline

    From: Madison Wisconsin
    Registered: 4/01/2013
    Posts: 2,730

    Re: Any suggestions for alternator only brackets for serpentine belt

    Raymond_B wrote:

    That looks like a truck alternator/tensioner mount. If so, be sure to check the tensioner bolt and its associated threads in the bracket. The truck stuff is notorious for that bolt either breaking or coming loose and messing up the threads or both!

    Also meant to ask, what is the sensor in the tstat housing? I am sure you know, but that is on the otherside of the t-stat and will not read correctly until the tstat opens?? 

    Its my sons 68.  It’s either for temp sensor or electric fans.

       •Thread Starter
     

    4/30/2023 8:34 AM  #9

    Steve69
    Senior 24-7 FYI Addict

    Offline

    From: Madison Wisconsin
    Registered: 4/01/2013
    Posts: 2,730

    Re: Any suggestions for alternator only brackets for serpentine belt

    6sally6 wrote:

    Just curious.......what all will be driven off the crank pulley ?
    Eliminating any more non-essentials things?! (smog pump...AC...ect.)
    6sal6

    Just the alternator.

       •Thread Starter
     

    4/30/2023 8:40 AM  #10

    Steve69
    Senior 24-7 FYI Addict

    Offline

    From: Madison Wisconsin
    Registered: 4/01/2013
    Posts: 2,730

    Re: Any suggestions for alternator only brackets for serpentine belt

    MS wrote:

    To simplify things, a 69 alternator bracket and a normal rotation water pump would be my choice.  A single v-belt would do the job, or same setup using multi-groove pulleys for a six groove serpentine belt would be simple and effective.

    Also, if anyone has an extra foxbody power steering pump snd mounting brackrt laying around, I need one for a fox serpentine stdtem I have, but is missing the pump.

    I have a new 1994 F150 pump that looks a lot like a fox body pump I’ll give you a deal on.   I think if we switch to a regular rotation water pump and a late 80s crown vic serpentine water pump pulley what we have here might work.  It’s a 1994 truck front dress.

       •Thread Starter
     

    5/12/2023 8:16 AM  #11

    Steve69
    Senior 24-7 FYI Addict

    Offline

    From: Madison Wisconsin
    Registered: 4/01/2013
    Posts: 2,730

    Re: Any suggestions for alternator only brackets for serpentine belt

    We ended up finding a crown vic water pump pulley with a standard rotation water pump.  For some reason no pic icon to add pics.

    Last edited by Steve69 (5/12/2023 8:18 AM)

       •Thread Starter
     

    5/13/2023 6:40 PM  #12

    BobE
    Senior 24-7 FYI Addict

    Offline

    From: White Plains, NY
    Registered: 4/04/2013
    Posts: 2,625

    Re: Any suggestions for alternator only brackets for serpentine belt

    Steve69 wrote:

    We ended up finding a crown vic water pump pulley with a standard rotation water pump. For some reason no pic icon to add pics.

    Very nice.  I might consider making this swap and would like some more details. 
    Is this whole serpentine setup from a Crown Vic? 
    Any particular years?
    Thank you for any info you can provide.
     

    65 Fastback, 351W, 5-speed, 4 wheel discs, 9" rear,  R&C Front End.
     

    5/14/2023 12:43 PM  #13

    Steve69
    Senior 24-7 FYI Addict

    Offline

    From: Madison Wisconsin
    Registered: 4/01/2013
    Posts: 2,730

    Re: Any suggestions for alternator only brackets for serpentine belt

    BobE wrote:

    Steve69 wrote:

    We ended up finding a crown vic water pump pulley with a standard rotation water pump. For some reason no pic icon to add pics.

    Very nice.  I might consider making this swap and would like some more details. 
    Is this whole serpentine setup from a Crown Vic? 
    Any particular years?
    Thank you for any info you can provide.
     

    The alternator bracket is off a 1994 F150

       •Thread Starter
     

     

    1 of 1

  • Index
  •  » FYI Ford, Classic Mustang Tech Discussion
  •  »  Any suggestions for alternator only brackets for serpentine belt

    • Board footera


    REMEMBER!!! When posting a question about your Mustang or other Ford on this forum, BE SURE to tell us what it is, what year, engine, etc so we have enough information to go on.