FYI FORD - MustangSteve's Ford Mustang Forum
The Internet's Most Knowledgeable Classic Mustang Information
IF YOU HAVE A QUESTION ABOUT CLASSIC FORD MUSTANGS, YOU HAVE COME TO THE RIGHT PLACE!
MustangSteve has over 30 years of Mustang experience, having owned 30 of them and restored several others. With the help of other Mustangers, this site is dedicated to helping anyone wanting to restore or modify their Mustang.... THERE ARE NO DUMB QUESTIONS!!!!!
Visit MustangSteve's web site to view some of my work and find details for:
FYIFORD Contributors' PICTURES - Power Brake Retrofit Kits for 65-66 Stangs - Classic Mustang FAQ's by MustangSteve - How to wire in a Duraspark Ignition - Mustang Ride Height Pictures and Descriptions - Steel Bushings to fit Granada Spindles to Mustang Tie Rods - Visit my EBAY store MustangSteve Performance - How to Install Granada Disc Brakes MustangSteve's Disc Brake Swap Page - FYIFORD Acronyms for guide to all the acronyms used on this page - FYIFORD Important information and upcoming events

You are not logged in. Would you like to login or register?

11/15/2023 3:23 PM  #1


Is there a difference 65 & 66 Fenders?



I had never heard this before and am wondering if any of you have.  A friend with a 66 Mustang had someone tell him that the 65 & 66 Mustang fenders were different.  The difference being that the 66 fenders have two triangle shaped stamps on the lip of the fenders where it bolts to the body, as shown in the attached picture.  The picture is from my car, and is the driver’s side, my passenger side does not have these shapes.
Both of my front fenders were replaced with Ford replacements over 30 years-ago (before Ford stopped offering them).  My Ford parts man is a high school friend who spent his career as a Ford parts manager (started in 1968, retired now) said he never heard this, but offered that maybe it was a stamping that indicated the facility where it was made. 
Anyway, just curious if there is any validity to it.
 


65 Fastback, 351W, 5-speed, 4 wheel discs, 9" rear,  R&C Front End.
 

11/15/2023 5:03 PM  #2


Re: Is there a difference 65 & 66 Fenders?

I DO know a little about the 'after market fenders.'.....
65 & 66 fenders equally fit like crap !
Interesting.........
6sally6


Get busy Liv'in or get busy Die'n....Host of the 2020 Bash at the Beach/The only Bash that got cancelled  )8
 

11/15/2023 5:46 PM  #3


Re: Is there a difference 65 & 66 Fenders?

That is a crash folding point, so there is a designed-in place for the fender to fold when you crash it.
I never paid much attention to concours stuff…


Money you enjoy wasting is NOT wasted money... unless your wife finds out.
 

11/15/2023 7:27 PM  #4


Re: Is there a difference 65 & 66 Fenders?

No dimples on fenders either side here.

This is a 17U build date car.

Driver fender =  6 10 2
Passenger fender = 7 29 C3

 

11/15/2023 7:43 PM  #5


Re: Is there a difference 65 & 66 Fenders?

My original fenders - 66  - has them on the driver side.  None on the passengeer side, but it is a repro.

Last edited by lowercasesteve (11/15/2023 7:47 PM)


Original owner - 351w,T-5, 4whl disks, power R&P
 

11/15/2023 11:01 PM  #6


Re: Is there a difference 65 & 66 Fenders?

BobE wrote:



I had never heard this before and am wondering if any of you have.  A friend with a 66 Mustang had someone tell him that the 65 & 66 Mustang fenders were different.  The difference being that the 66 fenders have two triangle shaped stamps on the lip of the fenders where it bolts to the body, as shown in the attached picture.  The picture is from my car, and is the driver’s side, my passenger side does not have these shapes.
Both of my front fenders were replaced with Ford replacements over 30 years-ago (before Ford stopped offering them).  My Ford parts man is a high school friend who spent his career as a Ford parts manager (started in 1968, retired now) said he never heard this, but offered that maybe it was a stamping that indicated the facility where it was made. 
Anyway, just curious if there is any validity to it.
 

My 65 doesn't have the triangles on the fender, but there are some inverted dimples on the inner fenders at almost the same location (as shown in your picture). I believe the fenders are original equipment.
 


68 coupe - 351W, 4R70W, 9" 3.25 -- 65 convertible - 289 4v, C4, 8" 3.00
 

11/16/2023 9:02 AM  #7


Re: Is there a difference 65 & 66 Fenders?

This might be similar to the different brake pedals I have come across through many years of modifying pedals for customers
Apparently there were at least three different manufacturers or designs for the brake pedal doing the exact same job on similar cars. Subtle differences in their design.


Money you enjoy wasting is NOT wasted money... unless your wife finds out.
 

11/16/2023 10:15 AM  #8


Re: Is there a difference 65 & 66 Fenders?

As I said I'm just curious if anybody had come across this item.
I would tend to agree with my friend, the x-parts manager and MS, that this may have been a identifier of the sub-supplier, not meant as a unique identifier for a certain model year.  
I also never was a concours guy, I've modified my Mustang way too far to worry about maintaining those details. 


65 Fastback, 351W, 5-speed, 4 wheel discs, 9" rear,  R&C Front End.
     Thread Starter
 

11/17/2023 8:43 AM  #9


Re: Is there a difference 65 & 66 Fenders?

Hey, Bob, how about showing us your installed pics of the brake hydro-boost system you installed?  Hoses, pump and everything.


Money you enjoy wasting is NOT wasted money... unless your wife finds out.
 

11/21/2023 9:16 AM  #10


Re: Is there a difference 65 & 66 Fenders?

I'll put together a write-up and pictures of my hydroboost installation and post soon. 


65 Fastback, 351W, 5-speed, 4 wheel discs, 9" rear,  R&C Front End.
     Thread Starter
 

Board footera


REMEMBER!!! When posting a question about your Mustang or other Ford on this forum, BE SURE to tell us what it is, what year, engine, etc so we have enough information to go on.