| ||
Visit MustangSteve's web site to view some of my work and find details for: FYIFORD Contributors' PICTURES - Power Brake Retrofit Kits for 65-66 Stangs - Classic Mustang FAQ's by MustangSteve - How to wire in a Duraspark Ignition - Mustang Ride Height Pictures and Descriptions - Steel Bushings to fit Granada Spindles to Mustang Tie Rods - Visit my EBAY store MustangSteve Performance - How to Install Granada Disc Brakes MustangSteve's Disc Brake Swap Page - FYIFORD Acronyms for guide to all the acronyms used on this page - FYIFORD Important information and upcoming events |
Offline
Today I tested the starter and I'm happy to say the engine turned over with the key and my clutch pedal switch worked like it should. Sadly the battery died before I could start the engine. I did get the tail lights to come on and the rear turn signals work along with the four ways. However I have no brake lights. I'll trouble shoot that issue later. I'm almost done wiring the contour fans as well. Getting closer to getting it running.
loading picture
Offline
Progress!
Offline
Nice!
Offline
I discovered the connectors inside the plug that plugs into the light switch got pushed out. It took a little effort but I got all the connectors to stay in place. I now have 12v at the brake lights switch but still no brake lights. I even jumped the switch with no luck. I think it's the cheap aftermarket taillight buckets.
REMEMBER!!! When posting a question about your Mustang or other Ford on this forum, BE SURE to tell us what it is, what year, engine, etc so we have enough information to go on. |