| ||
Visit MustangSteve's web site to view some of my work and find details for: FYIFORD Contributors' PICTURES - Power Brake Retrofit Kits for 65-66 Stangs - Classic Mustang FAQ's by MustangSteve - How to wire in a Duraspark Ignition - Mustang Ride Height Pictures and Descriptions - Steel Bushings to fit Granada Spindles to Mustang Tie Rods - Visit my EBAY store MustangSteve Performance - How to Install Granada Disc Brakes MustangSteve's Disc Brake Swap Page - FYIFORD Acronyms for guide to all the acronyms used on this page - FYIFORD Important information and upcoming events |
1 of 1
Offline
So this side was ah little worse then the passenger side was. The end that goes into the wheel well was gone. Luckily for some reason this side of the new rocker was ah much better fit and the end was even the right contour? Also the lower portion of the outer wheel house was gone too, so I started to make ah patch but quickly disovered I'll be replacing the whole quarter skin anyway. I'll show pics of that in another post.....
Offline
Derek........Have you bought a WHOLE rear quarter and are just cutting out panels?
Reason I ask ...I'm gonna need to replace some of my quarter(s) also. The part around the wheel wells. The quarters you have...............are you happy with the quality?
Thanx
6sal6
Offline
I did full quarters on my first mustang and vowed to NEVER do full quarters again, they fit horrible! I'll be doing full face skins on this one. AND you'll be happy about this. I've dicided to go ahead and do the DSE mini tubs while I'm at it
Last edited by Derek (12/20/2013 6:25 PM)
Offline
Derek wrote:
I've dicided to go ahead and do the DSE mini tubs while I'm at it
Very nice work! I'm looking forward to seeing how the DSE mini tubs turn out.
Offline
Thanks me too. Yeah the kit is pretty expensive $400.00+shipping ,but I know if I don't do it I'll always wish I did ,Soo I'll order it after Xmas along with new outer wheel houses and quarter skins..
Offline
Are you doing their frame rail kit too? What suspension are you going to use for the rear?
Offline
Nice work! I'm looking forward to watching your progress on these repairs.
Offline
HenryJ wrote:
Are you doing their frame rail kit too? What suspension are you going to use for the rear?
Yeah the DSE mini tub "Kit", comes with the altered frame rail section you'll need to gain the full 2"so I'll be cutting out ah peice of my frame to fit that in. As for suspension I'm guna do RRS both front, and rear. I'll have to section and narrow one of the cross members to fit in between the mini tubs in the rear , but RRS factors that in with there design and even gives instruction on how to do it .So it should be no problem.
Last edited by Derek (12/21/2013 8:59 AM)
1 of 1
REMEMBER!!! When posting a question about your Mustang or other Ford on this forum, BE SURE to tell us what it is, what year, engine, etc so we have enough information to go on. |