FYI FORD - MustangSteve's Ford Mustang Forum
The Internet's Most Knowledgeable Classic Mustang Information
IF YOU HAVE A QUESTION ABOUT CLASSIC FORD MUSTANGS, YOU HAVE COME TO THE RIGHT PLACE!
MustangSteve has over 30 years of Mustang experience, having owned 30 of them and restored several others. With the help of other Mustangers, this site is dedicated to helping anyone wanting to restore or modify their Mustang.... THERE ARE NO DUMB QUESTIONS!!!!!
Visit MustangSteve's web site to view some of my work and find details for:
FYIFORD Contributors' PICTURES - Power Brake Retrofit Kits for 65-66 Stangs - Classic Mustang FAQ's by MustangSteve - How to wire in a Duraspark Ignition - Mustang Ride Height Pictures and Descriptions - Steel Bushings to fit Granada Spindles to Mustang Tie Rods - Visit my EBAY store MustangSteve Performance - How to Install Granada Disc Brakes MustangSteve's Disc Brake Swap Page - FYIFORD Acronyms for guide to all the acronyms used on this page - FYIFORD Important information and upcoming events

You are not logged in. Would you like to login or register?

  • Index
  •  » FYI Ford, Classic Mustang Tech Discussion
  •  » Shout out to Ramses....woooooohooooooooooo its here.

    • 1 of 1

       

    2/05/2014 2:46 PM  #1

    dodgestang
    FYI FORD Member

    Offline

    Registered: 4/02/2013
    Posts: 87

    Shout out to Ramses....woooooohooooooooooo its here.

    Ramses makes pony cutouts, lights with LEDs and offers them for sale.  I bought one a couple years ago for my basement and love it.



    Flash forward to a couple weeks ago I sent him a message and said "hey....think you could make me another one....but...BIGGGGGGGER?"

    Well, right after the ice storm, while I was without power for 9 hours, running two fires to keep the house warm, and cleaning up a flooded basement...the UPS driver literally WALKED this package down my driveway (because he couldn't drive down it...it was all ice).

    And what do you think I found inside.....





    This isn't the final location I am going to hand it but I quickly popped two nails in the wall to get it up and in a safe spot!





    Last edited by dodgestang (2/05/2014 3:00 PM)

    Nick - 65FB 410C AOD 'D.T.' - 67FB 347 T5 'Cruiser' - 68FB 408W T5 'Brute'
     

    2/05/2014 2:55 PM  #2

    boomyal
    Senior 24-7 FYI Addict

    Offline

    From: Vancouver, Washington
    Registered: 4/01/2013
    Posts: 1,295

    Re: Shout out to Ramses....woooooohooooooooooo its here.

    Lookin' real good! Ramseys should branch out and find other distinctive logos he could make, then advertise them on Ebay.  One that comes to mind is the Chebbie Bowtie.  I know that sounds like sacrilege, but hey, a buck is a buck.

    Last edited by boomyal (2/05/2014 3:00 PM)

     

    2/05/2014 3:09 PM  #3

    Muzz 66
    I FYI 24-7

    Offline

    From: Madera, California
    Registered: 4/01/2013
    Posts: 416

    Re: Shout out to Ramses....woooooohooooooooooo its here.

    It's OK to take money from bow tie boys...no prob there.

    Awesome signs!

    '66 Fastback since July 27, 1981. Springtime Yellow, originally a 200 cu in, 4 speed. Also a '92 LX Coupe, 5.0, 5 speed.
     

    2/05/2014 3:25 PM  #4

    MS
    Forum Originator

    Offline

    From: Canyon Lake, Texas
    Registered: 1/24/2013
    Posts: 12,349

    Re: Shout out to Ramses....woooooohooooooooooo its here.

    I have been wanting a big one like that to put on my gate.  I guess I will have to place an order.

    Money you enjoy wasting is NOT wasted money... unless your wife finds out.
     

    2/05/2014 3:35 PM  #5

    boomyal
    Senior 24-7 FYI Addict

    Offline

    From: Vancouver, Washington
    Registered: 4/01/2013
    Posts: 1,295

    Re: Shout out to Ramses....woooooohooooooooooo its here.

    If it would work out, Ramseys should also make a Ford Oval with a slotted edge around the perimeter and the script cut out in the center.

    It is true, however, that there is probably nothing else like the Mustang, that lends itself so well to his motif.

     

    2/05/2014 3:44 PM  #6

    dodgestang
    FYI FORD Member

    Offline

    Registered: 4/02/2013
    Posts: 87

    Re: Shout out to Ramses....woooooohooooooooooo its here.

    MustangSteve wrote:

    I have been wanting a big one like that to put on my gate.  I guess I will have to place an order.

    I have an open question out to him about getting one made out of stainless steel suitable for hanging outside on my barn.......

    Nick - 65FB 410C AOD 'D.T.' - 67FB 347 T5 'Cruiser' - 68FB 408W T5 'Brute'
       •Thread Starter
     

    2/05/2014 6:25 PM  #7

    Don
    Senior 24-7 FYI Addict

    Offline

    From: Coppell, Texas
    Registered: 4/02/2013
    Posts: 1,221

    Re: Shout out to Ramses....woooooohooooooooooo its here.

    Well dammit, I guess size DOES matter.

     

    2/05/2014 6:32 PM  #8

    boomyal
    Senior 24-7 FYI Addict

    Offline

    From: Vancouver, Washington
    Registered: 4/01/2013
    Posts: 1,295

    Re: Shout out to Ramses....woooooohooooooooooo its here.

    Don wrote:

    Well dammit, I guess size DOES matter.

    So it's rumored!

     

    2/06/2014 1:01 AM  #9

    True74yamaha
    Senior 24-7 FYI Addict

    Offline

    From: Salt Lake City
    Registered: 5/07/2013
    Posts: 2,537

    Re: Shout out to Ramses....woooooohooooooooooo its here.

    Those are simple but awesome I need to get a couple. What would be neat it make a large one and make it in a table top or something

     

    2/06/2014 8:17 AM  #10

    66fastback
    FYI FORD Member

    Offline

    From: Farmers Branch, TX
    Registered: 4/18/2013
    Posts: 46

    Re: Shout out to Ramses....woooooohooooooooooo its here.

    SWEET

     

    2/06/2014 8:46 AM  #11

    TimC
    I FYI 24-7

    Offline

    From: Wheaton, Illinois
    Registered: 4/01/2013
    Posts: 878

    Re: Shout out to Ramses....woooooohooooooooooo its here.

    Dodgestang - Do you mind sharing some details about the color on that fastback?  I LIKE that!

     

    2/06/2014 6:46 PM  #12

    dodgestang
    FYI FORD Member

    Offline

    Registered: 4/02/2013
    Posts: 87

    Re: Shout out to Ramses....woooooohooooooooooo its here.

    The green mustang is painted in PPG 1967 Dark Moss Green with added silver mettalic flake and pearl.    Just finished getting it buffed a couple weeks ago and I am in the middle of putting it back together.

    Nick - 65FB 410C AOD 'D.T.' - 67FB 347 T5 'Cruiser' - 68FB 408W T5 'Brute'
       •Thread Starter
     

    2/06/2014 10:09 PM  #13

    MS
    Forum Originator

    Offline

    From: Canyon Lake, Texas
    Registered: 1/24/2013
    Posts: 12,349

    Re: Shout out to Ramses....woooooohooooooooooo its here.

    I LIKE that table top idea!!!!!

    Money you enjoy wasting is NOT wasted money... unless your wife finds out.
     

    2/07/2014 6:06 PM  #14

    darren
    I FYI 24-7

    Offline

    From: Wentzville Mo.
    Registered: 4/05/2013
    Posts: 460

    Re: Shout out to Ramses....woooooohooooooooooo its here.

    Careful boys.....
    I stopped showing off trademarked logos on open forums for a very compelling reason.....
    Namely a politely worded cease & desist from a lawfirm representing  a powerful client.
    There are eyes everywhere, who are paid to look for this type of stuff.

     

    2/07/2014 9:32 PM  #15

    Ramses
    FYI Addict

    Offline

    From: Dallas,Tx
    Registered: 4/01/2013
    Posts: 135

    Re: Shout out to Ramses....woooooohooooooooooo its here.

    darren wrote:

    Careful boys.....
    I stopped showing off trademarked logos on open forums for a very compelling reason.....
    Namely a politely worded cease & desist from a lawfirm representing  a powerful client.
    There are eyes everywhere, who are paid to look for this type of stuff.

     

    Yep you bring up a good point. But I don't sell it as "The Ford Mustang Horse". Although the design makes people think that it's mustang related,I make sure and state that it is just the silhouette of a running horse.  Plus,It's not like I'm running a business off of this and banking in money. If I were,I'd make sure to at least get a permit/licensing on any design that is actually related to a logo of an organization order to avoid copyright infringement.

     

    2/07/2014 9:40 PM  #16

    terry
    Senior 24-7 FYI Addict

    Offline

    From: vandalia, illinois
    Registered: 4/01/2013
    Posts: 1,882

    Re: Shout out to Ramses....woooooohooooooooooo its here.

    darren wrote:

    Careful boys.....
    I stopped showing off trademarked logos on open forums for a very compelling reason.....
    Namely a politely worded cease & desist from a lawfirm representing  a powerful client.
    There are eyes everywhere, who are paid to look for this type of stuff.

    Darren is that what happened to your styrofoam projects you posted a while ago???

     

    2/08/2014 7:35 AM  #17

    darren
    I FYI 24-7

    Offline

    From: Wentzville Mo.
    Registered: 4/05/2013
    Posts: 460

    Re: Shout out to Ramses....woooooohooooooooooo its here.

    Ramses wrote:

    darren wrote:

    Careful boys.....
    I stopped showing off trademarked logos on open forums for a very compelling reason.....
    Namely a politely worded cease & desist from a lawfirm representing  a powerful client.
    There are eyes everywhere, who are paid to look for this type of stuff.

     

    Yep you bring up a good point. But I don't sell it as "The Ford Mustang Horse". Although the design makes people think that it's mustang related,I make sure and state that it is just the silhouette of a running horse. Plus,It's not like I'm running a business off of this and banking in money. If I were,I'd make sure to at least get a permit/licensing on any design that is actually related to a logo of an organization order to avoid copyright infringement.

    No reasons to defend your actions with me, I agree.
    Just remember the people trolling won't agree and they make their livings going after this kind of stuff, hobby or not.
    All it took was one letter and I'm convinced.

     

    2/08/2014 7:42 AM  #18

    darren
    I FYI 24-7

    Offline

    From: Wentzville Mo.
    Registered: 4/05/2013
    Posts: 460

    Re: Shout out to Ramses....woooooohooooooooooo its here.

    "terry" wrote:

    "darren" wrote:

    Careful boys.....
    I stopped showing off trademarked logos on open forums for a very compelling reason.....
    Namely a politely worded cease & desist from a lawfirm representing  a powerful client.
    There are eyes everywhere, who are paid to look for this type of stuff.

    Darren is that what happened to your styrofoam projects you posted a while ago???

    Not specifically that item, and not this forum, but very similar. My $135 consult with my lawyer concluded I could make it for my own personal enjoyment, but even giving as a gift could be considered infringement.
    Apparently, chasing small guys and vigorously defending the trademark gives them a stronger case when they go up against the big people who make a ton of money doing it, or so I was told.
    I'm not a lawyer, and not trying to be a Debbie-Downer, but a registered letter showing up threatening all sorts of legal action with damages was enough to get MY attention, which I guess was the point.
     

     

    2/09/2014 8:55 PM  #19

    Pete M
    FYI FORD Member

    Offline

    Registered: 4/01/2013
    Posts: 76

    Re: Shout out to Ramses....woooooohooooooooooo its here.

    Off topic, but, the UPS driver shouldn't be parking in your driveway to begin with.
    Backing out of a driveway with a big truck is just ASKING for an accident.

     

    2/10/2014 9:42 PM  #20

    dodgestang
    FYI FORD Member

    Offline

    Registered: 4/02/2013
    Posts: 87

    Re: Shout out to Ramses....woooooohooooooooooo its here.

    Pete M wrote:

    Off topic, but, the UPS driver shouldn't be parking in your driveway to begin with.
    Backing out of a driveway with a big truck is just ASKING for an accident.

    Uhhhhh......everything you see here is my driveway  ;)



    He normally pulls down my driveway, turns around on my driveway, and drives away ;)

    Here's the fedex ground guy 2 weeks ago (I towed him back out to the road)

    http://www.youtube.com/watch?v=JIVYvmeX2GE


    Have you not seen any of my multitude of burnout videos?  I thought everyone in the world has seen one by now ;)

    http://www.youtube.com/watch?v=WdE8UUnG_Mg


     

    Nick - 65FB 410C AOD 'D.T.' - 67FB 347 T5 'Cruiser' - 68FB 408W T5 'Brute'
       •Thread Starter
     

    2/10/2014 9:50 PM  #21

    dodgestang
    FYI FORD Member

    Offline

    Registered: 4/02/2013
    Posts: 87

    Re: Shout out to Ramses....woooooohooooooooooo its here.

    Here I am 'plowing' my driveway ;)

    http://www.youtube.com/watch?v=XzaU7P7T1V4


    And here I am sledding on it (this btw was basically what the driveway looked like 2 days later, then with a layer of ice on top that he delivered in) ;)

    http://www.youtube.com/watch?v=xbFWs8742As

     

    Nick - 65FB 410C AOD 'D.T.' - 67FB 347 T5 'Cruiser' - 68FB 408W T5 'Brute'
       •Thread Starter
     

    2/22/2014 4:03 PM  #22

    dodgestang
    FYI FORD Member

    Offline

    Registered: 4/02/2013
    Posts: 87

    Re: Shout out to Ramses....woooooohooooooooooo its here.

    Hey Ramses......I've finally the new garage ornament mounted in its forever home!



    Nick - 65FB 410C AOD 'D.T.' - 67FB 347 T5 'Cruiser' - 68FB 408W T5 'Brute'
       •Thread Starter
     

    2/22/2014 5:34 PM  #23

    Ramses
    FYI Addict

    Offline

    From: Dallas,Tx
    Registered: 4/01/2013
    Posts: 135

    Re: Shout out to Ramses....woooooohooooooooooo its here.

    dodgestang wrote:

    Hey Ramses......I've finally the new garage ornament mounted in its forever home!



     


    Ithat spot is just PERFECT!

     

    2/22/2014 10:31 PM  #24

    6sally6
    Hyper FYIFORD ADDICT

    Offline

    From: Surfside Beach,SC
    Registered: 4/02/2013
    Posts: 6,899

    Re: Shout out to Ramses....woooooohooooooooooo its here.

    WOW-dodgestang.......nice little shop you got there!! The pony DOES set it off..don't  you agree!!
    6sally6

    Get busy Liv'in or get busy Die'n....Host of the 2020 Bash at the Beach/The only Bash that got cancelled  )8
     

    2/23/2014 7:03 AM  #25

    darren
    I FYI 24-7

    Offline

    From: Wentzville Mo.
    Registered: 4/05/2013
    Posts: 460

    Re: Shout out to Ramses....woooooohooooooooooo its here.

    Beautiful sign for a beautiful shop.....LOVE IT!!

     

     

    1 of 1

  • Index
  •  » FYI Ford, Classic Mustang Tech Discussion
  •  »  Shout out to Ramses....woooooohooooooooooo its here.

    • Board footera


    REMEMBER!!! When posting a question about your Mustang or other Ford on this forum, BE SURE to tell us what it is, what year, engine, etc so we have enough information to go on.