| ||
Visit MustangSteve's web site to view some of my work and find details for: FYIFORD Contributors' PICTURES - Power Brake Retrofit Kits for 65-66 Stangs - Classic Mustang FAQ's by MustangSteve - How to wire in a Duraspark Ignition - Mustang Ride Height Pictures and Descriptions - Steel Bushings to fit Granada Spindles to Mustang Tie Rods - Visit my EBAY store MustangSteve Performance - How to Install Granada Disc Brakes MustangSteve's Disc Brake Swap Page - FYIFORD Acronyms for guide to all the acronyms used on this page - FYIFORD Important information and upcoming events |
Offline
Has anyone heard of Frig-Cool Inc.? I bought all the A/C parts including a Sanden compressor and a very plain looking under the dash unit from a guy parting out his 66 with major frame rust. I didn't get a manual and can't find one on the internet. Installation looks straight forward except the compressor mounts. Any help out there on mounting the compressor? I am running a 65 fastback with a 351 Windsor with power steering. I will take pics when I can and post.
Offline
If you cannot find them locally, you can buy the compressor mounts from Classic Auto Air or Vintage Air or probably any of the other custom suppliers.
Offline
The brackets mount to the front of the block. If you don't have those holes then. You may have to make some brackets. Or go to the junkyard and pull off a 351 with a/c compressor bracket and compressor. Then install that on your car then see if your compressor will work with that or if you need to use the newer compressor from a newer 351.
Offline
REMEMBER!!! When posting a question about your Mustang or other Ford on this forum, BE SURE to tell us what it is, what year, engine, etc so we have enough information to go on. |