FYI FORD - MustangSteve's Ford Mustang Forum
The Internet's Most Knowledgeable Classic Mustang Information
IF YOU HAVE A QUESTION ABOUT CLASSIC FORD MUSTANGS, YOU HAVE COME TO THE RIGHT PLACE!
MustangSteve has over 30 years of Mustang experience, having owned 30 of them and restored several others. With the help of other Mustangers, this site is dedicated to helping anyone wanting to restore or modify their Mustang.... THERE ARE NO DUMB QUESTIONS!!!!!
Visit MustangSteve's web site to view some of my work and find details for:
FYIFORD Contributors' PICTURES - Power Brake Retrofit Kits for 65-66 Stangs - Classic Mustang FAQ's by MustangSteve - How to wire in a Duraspark Ignition - Mustang Ride Height Pictures and Descriptions - Steel Bushings to fit Granada Spindles to Mustang Tie Rods - Visit my EBAY store MustangSteve Performance - How to Install Granada Disc Brakes MustangSteve's Disc Brake Swap Page - FYIFORD Acronyms for guide to all the acronyms used on this page - FYIFORD Important information and upcoming events

You are not logged in. Would you like to login or register?

  • Index
  •  » FYI Ford, Classic Mustang Tech Discussion
  •  » Late '65-'66 fold down seat help, please!

    • 1 of 1

       

    7/27/2014 8:45 PM  #1

    MWM
    I FYI 24-7

    Offline

    Registered: 4/01/2013
    Posts: 423

    Late '65-'66 fold down seat help, please!

    On my late '65 mustang fastback, I have the panels bare. One panel have the triangle cut outs which is '66 for the chrome dish. However my angled panel does not have the nuts to bolt in the shoe shaped rubber bumper. May I get a measurement so I can drill the hole to add the shoe shaped rubber bumper? I hope this is not too confusing!
    Thank you!

     

    7/27/2014 8:59 PM  #2

    Mochaman
    Senior 24-7 FYI Addict

    Offline

    From: Royse City, Texas
    Registered: 4/02/2013
    Posts: 1,430

    Re: Late '65-'66 fold down seat help, please!

    Do you have some pictures of the area you are talking about?

     

    7/28/2014 2:13 PM  #3

    Tubo
    2008 BASH V Host

    Offline

    From: Ft. Walton Beach, Florida
    Registered: 4/01/2013
    Posts: 1,792

    Re: Late '65-'66 fold down seat help, please!

    You want to use 65 bumpers or 66.??
     Mine is early 65 so I can sent measurements for that.

    Corky

    If it ain't broke, I haven't modified it Yet
     

    7/28/2014 8:05 PM  #4

    MWM
    I FYI 24-7

    Offline

    Registered: 4/01/2013
    Posts: 423

    Re: Late '65-'66 fold down seat help, please!

    Good Evening,
    I am going to finish it as a '66 since I have the panels. I don't have a photo, but below is a link showing the bumpers.
    Thank you!

    http://www.folddownseat.com/100_4376.jpg

       •Thread Starter
     

     

    1 of 1

  • Index
  •  » FYI Ford, Classic Mustang Tech Discussion
  •  »  Late '65-'66 fold down seat help, please!

    • Board footera


    REMEMBER!!! When posting a question about your Mustang or other Ford on this forum, BE SURE to tell us what it is, what year, engine, etc so we have enough information to go on.