FYI FORD - MustangSteve's Ford Mustang Forum
The Internet's Most Knowledgeable Classic Mustang Information
IF YOU HAVE A QUESTION ABOUT CLASSIC FORD MUSTANGS, YOU HAVE COME TO THE RIGHT PLACE!
MustangSteve has over 30 years of Mustang experience, having owned 30 of them and restored several others. With the help of other Mustangers, this site is dedicated to helping anyone wanting to restore or modify their Mustang.... THERE ARE NO DUMB QUESTIONS!!!!!
Visit MustangSteve's web site to view some of my work and find details for:
FYIFORD Contributors' PICTURES - Power Brake Retrofit Kits for 65-66 Stangs - Classic Mustang FAQ's by MustangSteve - How to wire in a Duraspark Ignition - Mustang Ride Height Pictures and Descriptions - Steel Bushings to fit Granada Spindles to Mustang Tie Rods - Visit my EBAY store MustangSteve Performance - How to Install Granada Disc Brakes MustangSteve's Disc Brake Swap Page - FYIFORD Acronyms for guide to all the acronyms used on this page - FYIFORD Important information and upcoming events

You are not logged in. Would you like to login or register?

  • Index
  •  » FYI Ford, Classic Mustang Tech Discussion
  •  » Cobra-RLG

    • 1 of 1

       

    5/15/2019 12:05 PM  #1

    Caivn
    Active Member

    Offline

    Registered: 5/15/2019
    Posts: 2

    Cobra-RLG

    Hey guys, I just recently bought the COBRA-RLG for my Lincoln Versailles rear end. I purchased the 95 Mustang Cobra brakes from Autozone (Duralast 18-B4544A and 18-B454A) but when I went to install the cobra caliper cradle to the Bracket B in the kit with the supplied bolts, the bolts were too big for the cradle but the right size for the Bracket B. I sent those calipers and brackets back and ordered the 04 Cobra setup to see if they will work. But any info on which caliper and cradle needed would be great. 

    Thanks

     

    5/16/2019 3:03 PM  #2

    TKOPerformance
    Hyper FYIFORD ADDICT

    Online!

    From: Newark, DE
    Registered: 12/15/2014
    Posts: 7,523

    Re: Cobra-RLG

    Cobra rear brakes are all the same from '94-'04.  Fair warning that the calipers themselves are the same as the GT, but the pads and mounting bracket are different due to the wider rotors Cobras use.  I'm wondering if you got some mismatched parts due to that partial crossover of GT and Cobra parts. 

     

    5/16/2019 4:50 PM  #3

    MS
    Forum Originator

    Offline

    From: Canyon Lake, Texas
    Registered: 1/24/2013
    Posts: 12,297

    Re: Cobra-RLG

    Sounds like wrong parts in the autozone box.
    Can you post a picture of the problem?

    You do have the instructions in hand, right?

    Money you enjoy wasting is NOT wasted money... unless your wife finds out.
     

    5/17/2019 4:56 PM  #4

    Caivn
    Active Member

    Offline

    Registered: 5/15/2019
    Posts: 2

    Re: Cobra-RLG

    I contacted Michael and MS. we have figured out that the bracket that was sent to me from the kit was for the 13-15 brakes. Not the 94-04 cobra brakes. Customer service was amazing.

       •Thread Starter
     

     

    1 of 1

  • Index
  •  » FYI Ford, Classic Mustang Tech Discussion
  •  »  Cobra-RLG

    • Board footera


    REMEMBER!!! When posting a question about your Mustang or other Ford on this forum, BE SURE to tell us what it is, what year, engine, etc so we have enough information to go on.