| ||
Visit MustangSteve's web site to view some of my work and find details for: FYIFORD Contributors' PICTURES - Power Brake Retrofit Kits for 65-66 Stangs - Classic Mustang FAQ's by MustangSteve - How to wire in a Duraspark Ignition - Mustang Ride Height Pictures and Descriptions - Steel Bushings to fit Granada Spindles to Mustang Tie Rods - Visit my EBAY store MustangSteve Performance - How to Install Granada Disc Brakes MustangSteve's Disc Brake Swap Page - FYIFORD Acronyms for guide to all the acronyms used on this page - FYIFORD Important information and upcoming events |
Offline
The truth known, the reason Ford changed stats was probably to help meet government emission requirements.
Offline
It certainly didn't hurt emissions, and it helped mileage as well. Remember CAFE is a part of what OEMs must consider when determining things like t-stat temperature too.
Offline
Using a 180 degree T-Stat in mine.
I believe when the manufacturers went to the 195 degree in the late sixties/early seventies, it was to reduce emissions. If one is using a clutch fan, note that it is calibrated to the thermostat temperature. At least that is my experience years ago when I replaced a 195 for a 180 on my tow vehicle and ended up with cooling issues when towing. Reinstalled the 195, issues went away.
Offline
I am running a 180.
The 70 Cleveland did come with a 192. Windsor had 180.
REMEMBER!!! When posting a question about your Mustang or other Ford on this forum, BE SURE to tell us what it is, what year, engine, etc so we have enough information to go on. |