FYI FORD - MustangSteve's Ford Mustang Forum
The Internet's Most Knowledgeable Classic Mustang Information
IF YOU HAVE A QUESTION ABOUT CLASSIC FORD MUSTANGS, YOU HAVE COME TO THE RIGHT PLACE!
MustangSteve has over 30 years of Mustang experience, having owned 30 of them and restored several others. With the help of other Mustangers, this site is dedicated to helping anyone wanting to restore or modify their Mustang.... THERE ARE NO DUMB QUESTIONS!!!!!
Visit MustangSteve's web site to view some of my work and find details for:
FYIFORD Contributors' PICTURES - Power Brake Retrofit Kits for 65-66 Stangs - Classic Mustang FAQ's by MustangSteve - How to wire in a Duraspark Ignition - Mustang Ride Height Pictures and Descriptions - Steel Bushings to fit Granada Spindles to Mustang Tie Rods - Visit my EBAY store MustangSteve Performance - How to Install Granada Disc Brakes MustangSteve's Disc Brake Swap Page - FYIFORD Acronyms for guide to all the acronyms used on this page - FYIFORD Important information and upcoming events

You are not logged in. Would you like to login or register?

  • Index
  •  » FYI Ford, Classic Mustang Tech Discussion
  •  » Finally starting on neighbor’s T code to 5.0 conversion

    • 1 of 1

       

    3/25/2021 9:05 AM  #1

    MS
    Forum Originator

    Offline

    From: Canyon Lake, Texas
    Registered: 1/24/2013
    Posts: 12,260

    Finally starting on neighbor’s T code to 5.0 conversion

    We need a pair of 66 style frame mounts for a v8 engine.  They are different than 64-1/2 to 65 version.   Anyone have some to sell?

    Money you enjoy wasting is NOT wasted money... unless your wife finds out.
     

    3/25/2021 1:41 PM  #2

    Chaplin
    Senior 24-7 FYI Addict

    Offline

    Registered: 3/14/2015
    Posts: 1,027

    Re: Finally starting on neighbor’s T code to 5.0 conversion

    I have a set of mounts that I took off my car that I am not reusing, but I honestly have no idea what year they are. My car is a 64.5 and I thought it had the original drivetrain in it until I pulled the engine and trans out and discovered that the the engine and trans were out of a 67 Mustang.  I have not looked closely enough at the mounts to say whether they are 64.5 or 67 style.

    I can post a pic later if you want and if they will work, they can be yours for the cost of shipping.

     

    3/25/2021 6:27 PM  #3

    Chaplin
    Senior 24-7 FYI Addict

    Offline

    Registered: 3/14/2015
    Posts: 1,027

    Re: Finally starting on neighbor’s T code to 5.0 conversion

    Sorry, they are the 64.5 mounts. C3DAs.

    Last edited by Chaplin (3/25/2021 6:27 PM)

     

    3/28/2021 9:19 PM  #4

    BILLY WALTON from GEORGIA
    Carrollton, GA Bash Host

    Offline

    From: CARROLLTON GEORGIA
    Registered: 4/14/2013
    Posts: 2,431

    Re: Finally starting on neighbor’s T code to 5.0 conversion

    I WILL CHECK WITH DWAYNE THIS WEEK AND SEE IF HE HAS A PAIR.....HE HAS SEVRAL PARTS TYPE CARS.

    Its really me....I fixed my caps lock .
     

    3/29/2021 5:55 PM  #5

    MS
    Forum Originator

    Offline

    From: Canyon Lake, Texas
    Registered: 1/24/2013
    Posts: 12,260

    Re: Finally starting on neighbor’s T code to 5.0 conversion

    Found a pair of mounts. Thanks, TimC

    Anyone have stock V8/C-4 driveshaft for 65-66?  I think other years should fit as well.

    Money you enjoy wasting is NOT wasted money... unless your wife finds out.
       •Thread Starter
     

     

    1 of 1

  • Index
  •  » FYI Ford, Classic Mustang Tech Discussion
  •  »  Finally starting on neighbor’s T code to 5.0 conversion

    • Board footera


    REMEMBER!!! When posting a question about your Mustang or other Ford on this forum, BE SURE to tell us what it is, what year, engine, etc so we have enough information to go on.