FYI FORD - MustangSteve's Ford Mustang Forum
The Internet's Most Knowledgeable Classic Mustang Information
IF YOU HAVE A QUESTION ABOUT CLASSIC FORD MUSTANGS, YOU HAVE COME TO THE RIGHT PLACE!
MustangSteve has over 30 years of Mustang experience, having owned 30 of them and restored several others. With the help of other Mustangers, this site is dedicated to helping anyone wanting to restore or modify their Mustang.... THERE ARE NO DUMB QUESTIONS!!!!!
Visit MustangSteve's web site to view some of my work and find details for:
FYIFORD Contributors' PICTURES - Power Brake Retrofit Kits for 65-66 Stangs - Classic Mustang FAQ's by MustangSteve - How to wire in a Duraspark Ignition - Mustang Ride Height Pictures and Descriptions - Steel Bushings to fit Granada Spindles to Mustang Tie Rods - Visit my EBAY store MustangSteve Performance - How to Install Granada Disc Brakes MustangSteve's Disc Brake Swap Page - FYIFORD Acronyms for guide to all the acronyms used on this page - FYIFORD Important information and upcoming events

You are not logged in. Would you like to login or register?

  • Index
  •  » FYI Ford, Classic Mustang Tech Discussion
  •  » LOOKING FOR SOME GT TAILPIPES THRU THE VALENCE

    • 1 of 1

       

    4/07/2021 10:48 AM  #1

    BILLY WALTON from GEORGIA
    Carrollton, GA Bash Host

    Offline

    From: CARROLLTON GEORGIA
    Registered: 4/14/2013
    Posts: 2,431

    LOOKING FOR SOME GT TAILPIPES THRU THE VALENCE

    BEEN SEARCHING FOR SOME 2.5 TAILPIPES THAT ARE MADE FOR THE VALENCE ON A 1966 GT. MOST ALL I HAVE SEEN SAY COMES OUT UNDER REAR BUMPER OR NOT MADE FOR GT.
    I WONDER IF THE CAN BE TWEAKED A LITTLE TO COME OUT THE VALENCE. FLOWMASTER 15807 LOOK LIKE THEY COULD BE BENT A LITTLE AND WORK . YALL LOOK AT THEM AND SEE IF YALL THINK THEY COULD..
    I HAVE THE GT TIPS I WAS GONNA CUT AND WELD LIKE MUSTANGSTEVE DID ANYWAY.

    https://www.holley.com/products/exhaust/builder_components/direct_fit_pipe_kits/prebent_tailpipe/parts/15807

    Last edited by BILLY WALTON from GEORGIA (4/07/2021 9:22 PM)

    Its really me....I fixed my caps lock .
     

    4/07/2021 9:22 PM  #2

    BILLY WALTON from GEORGIA
    Carrollton, GA Bash Host

    Offline

    From: CARROLLTON GEORGIA
    Registered: 4/14/2013
    Posts: 2,431

    Re: LOOKING FOR SOME GT TAILPIPES THRU THE VALENCE

    https://www.holley.com/products/exhaust/builder_components/direct_fit_pipe_kits/prebent_tailpipe/parts/15807

    Its really me....I fixed my caps lock .
       •Thread Starter
     

    4/08/2021 6:42 AM  #3

    Nos681
    Senior 24-7 FYI Addict

    Offline

    From: Atlantic Mine, Michigan
    Registered: 7/14/2016
    Posts: 3,334

    Re: LOOKING FOR SOME GT TAILPIPES THRU THE VALENCE

    https://www.npdlink.com/product/exhaust-system-american-thunder/168010/202860

    These exit thru valence.

     

     

    1 of 1

  • Index
  •  » FYI Ford, Classic Mustang Tech Discussion
  •  »  LOOKING FOR SOME GT TAILPIPES THRU THE VALENCE

    • Board footera


    REMEMBER!!! When posting a question about your Mustang or other Ford on this forum, BE SURE to tell us what it is, what year, engine, etc so we have enough information to go on.