FYI FORD - MustangSteve's Ford Mustang Forum
The Internet's Most Knowledgeable Classic Mustang Information
IF YOU HAVE A QUESTION ABOUT CLASSIC FORD MUSTANGS, YOU HAVE COME TO THE RIGHT PLACE!
MustangSteve has over 30 years of Mustang experience, having owned 30 of them and restored several others. With the help of other Mustangers, this site is dedicated to helping anyone wanting to restore or modify their Mustang.... THERE ARE NO DUMB QUESTIONS!!!!!
Visit MustangSteve's web site to view some of my work and find details for:
FYIFORD Contributors' PICTURES - Power Brake Retrofit Kits for 65-66 Stangs - Classic Mustang FAQ's by MustangSteve - How to wire in a Duraspark Ignition - Mustang Ride Height Pictures and Descriptions - Steel Bushings to fit Granada Spindles to Mustang Tie Rods - Visit my EBAY store MustangSteve Performance - How to Install Granada Disc Brakes MustangSteve's Disc Brake Swap Page - FYIFORD Acronyms for guide to all the acronyms used on this page - FYIFORD Important information and upcoming events

You are not logged in. Would you like to login or register?

  • Index
  •  » FYI Ford, Classic Mustang Tech Discussion
  •  » 1993 302 HO automatic trans starter ?

    • 1 of 1

       

    4/23/2021 3:28 PM  #1

    mrputz1
    FYI Addict

    Offline

    Registered: 3/15/2014
    Posts: 136

    1993 302 HO automatic trans starter ?

    what mini starter do yo guys recommend . I have had nothing but trouble with the stuff on ebay. Latest problem Bendix is hanging up and causing a horrible noise  after starting . It is a brand new one .   HELP

     

    4/23/2021 3:33 PM  #2

    BILLY WALTON from GEORGIA
    Carrollton, GA Bash Host

    Offline

    From: CARROLLTON GEORGIA
    Registered: 4/14/2013
    Posts: 2,431

    Re: 1993 302 HO automatic trans starter ?

    Does it hang up just as it is starting or does it stay hung up. Mine does it for a few seconds and then disengages. It did it with my old starter too.

    Its really me....I fixed my caps lock .
     

    4/23/2021 3:51 PM  #3

    mrputz1
    FYI Addict

    Offline

    Registered: 3/15/2014
    Posts: 136

    Re: 1993 302 HO automatic trans starter ?

    Hangs up as it starts hangs up for a short time the lets loose . Strange when the engine warms up no problem ???????????????????

       •Thread Starter
     

    4/23/2021 3:53 PM  #4

    mrputz1
    FYI Addict

    Offline

    Registered: 3/15/2014
    Posts: 136

    Re: 1993 302 HO automatic trans starter ?

    perhaps putting some washers between the plate and starter might help what do you think ?

       •Thread Starter
     

    4/23/2021 5:15 PM  #5

    BILLY WALTON from GEORGIA
    Carrollton, GA Bash Host

    Offline

    From: CARROLLTON GEORGIA
    Registered: 4/14/2013
    Posts: 2,431

    Re: 1993 302 HO automatic trans starter ?

    mine is also a 93 gt starter..... not sure but it does the same and the other one did too....i was on there about 12 years
     

    Its really me....I fixed my caps lock .
     

    4/23/2021 5:42 PM  #6

    MS
    Forum Originator

    Offline

    From: Canyon Lake, Texas
    Registered: 1/24/2013
    Posts: 12,258

    Re: 1993 302 HO automatic trans starter ?

    The starter housing needs to positively engage in the big hole in the block plate. Adding washers would make that impossible.  Be sure your starter and flywheel are compatible. I know with swapped parts that is sometimes difficult...

    Money you enjoy wasting is NOT wasted money... unless your wife finds out.
     

    4/24/2021 5:10 AM  #7

    TKOPerformance
    Hyper FYIFORD ADDICT

    Offline

    From: Newark, DE
    Registered: 12/15/2014
    Posts: 7,499

    Re: 1993 302 HO automatic trans starter ?

    All 5.0s had an OEM gear reduction starter beginning in '92.  Its a cheap, reliable unit.  That's what I would use.

    Are you sure the starter isn't just installed too deep?  I had to shim mine outward to solve an issue like you describe.  There are Ford starter shims that can be purchased which allow this.  I made my own and used two shims to move it out enough to stop the issue.  The nose cone was still able to register properly, even with the spacers.

     

    4/24/2021 8:58 AM  #8

    6sally6
    Hyper FYIFORD ADDICT

    Offline

    From: Surfside Beach,SC
    Registered: 4/02/2013
    Posts: 6,853

    Re: 1993 302 HO automatic trans starter ?

    For years.....starters were transmission specific meaning A/T required and A/T type FoMoCo starter. Make sure the 'parts-counter-monkey' gave you the right one! (I wanna think later model starters were either/or.
    Might wanna check that.
    Also.......does your starter have its on solenoid?  If so.....I tink it require its on power supply from the battery (not just 'branched off' the power lead to the starter....although I did it that way on mine with no issues) Might be worth checking while you troubleshoot.
    6sally6

    Get busy Liv'in or get busy Die'n....Host of the 2020 Bash at the Beach/The only Bash that got cancelled  )8
     

    4/24/2021 9:34 AM  #9

    mrputz1
    FYI Addict

    Offline

    Registered: 3/15/2014
    Posts: 136

    Re: 1993 302 HO automatic trans starter ?

    Duh: you guys are right although for years i never had trouble installing a replacement starter , now it has happened . After research it dawned on me that the starter is in to deep . Dorman has spacers i  am getting a couple today  an will experiment with it . I saw the spacer looking at the MSD pdf about installation .  My ride is a replica 32 5 window and a lot o mixed parts .So far it wasn't a problem . Thank you for patience and help.   85 years old and still loving the car game .

       •Thread Starter
     

    4/24/2021 1:50 PM  #10

    6sally6
    Hyper FYIFORD ADDICT

    Offline

    From: Surfside Beach,SC
    Registered: 4/02/2013
    Posts: 6,853

    Re: 1993 302 HO automatic trans starter ?

    mrputz1 wrote:

    Duh: you guys are right although for years i never had trouble installing a replacement starter , now it has happened . After research it dawned on me that the starter is in to deep . Dorman has spacers i  am getting a couple today  an will experiment with it . I saw the spacer looking at the MSD pdf about installation .  My ride is a replica 32 5 window and a lot o mixed parts .So far it wasn't a problem . Thank you for patience and help.   85 years old and still loving the car game .

    MAN!!!!!!!
    I would love to see that 32-5 window!!
    Any chance you are planning to bring it to the MSB Bash in Rockwall, TEXAS!?
    6sally6 

    Get busy Liv'in or get busy Die'n....Host of the 2020 Bash at the Beach/The only Bash that got cancelled  )8
     

    4/24/2021 5:21 PM  #11

    mrputz1
    FYI Addict

    Offline

    Registered: 3/15/2014
    Posts: 136

    Re: 1993 302 HO automatic trans starter ?

    WELL : Put one shim in, just like it never happen. Starts every time . I used a NAPA part , would suggest just the Dorman one the Napa part not quite drilled mounting holes but it did go in.  First time or every thing. If you don't learn something new each day your on the way out . Texas is a long ways from the bay area ,besides our governor won't let us travel .  thanks again  there is no such thing as an electric hot rod . No oil no plastic . 

       •Thread Starter
     

    4/24/2021 7:17 PM  #12

    rpm
    Senior 24-7 FYI Addict

    Offline

    From: Bakersfield, Ca
    Registered: 9/17/2013
    Posts: 3,660

    Re: 1993 302 HO automatic trans starter ?

    mrputz1 wrote:

    WELL :  Texas is a long ways from the bay area ,besides our governor won't let us travel . 

    Say whaaat? He ain't the boss of me.

    Bob. 69 Mach 1, 393W, SMOD Toploader, Armstrong  steering, factory AC.
     

    5/19/2021 9:17 PM  #13

    mrputz1
    FYI Addict

    Offline

    Registered: 3/15/2014
    Posts: 136

    Re: 1993 302 HO automatic trans starter ?

    Gave up on the cheapo mini starters . Bought a Power master . FOLLOW the instructions for the depth from the face of the ring gear ,must be 3/4 inch which leaves 1/16 clearance . works great .  Customer service very good and made in USA .   Quality parts are not cheap but no ore problems .

       •Thread Starter
     

    5/20/2021 10:48 AM  #14

    Steve69
    Senior 24-7 FYI Addict

    Offline

    From: Madison Wisconsin
    Registered: 4/01/2013
    Posts: 2,738

    Re: 1993 302 HO automatic trans starter ?

    Ive had pretty good luck with these guys on Ebay.   https://www.ebay.com/itm/Starter-Mustang-302-1968-1974-F7Pz-11002-Fa-3223-3241-SFD0012-/144028653466?vxp=mtr&hash=item2188c6d79a

     

    5/20/2021 1:25 PM  #15

    TKOPerformance
    Hyper FYIFORD ADDICT

    Offline

    From: Newark, DE
    Registered: 12/15/2014
    Posts: 7,499

    Re: 1993 302 HO automatic trans starter ?

    Rock Auto has Motorcraft reman for $98.  '92 Mustang with 5.0.  That is a factory gear reduction (lightweight/mini) starter. 

     

     

    1 of 1

  • Index
  •  » FYI Ford, Classic Mustang Tech Discussion
  •  »  1993 302 HO automatic trans starter ?

    • Board footera


    REMEMBER!!! When posting a question about your Mustang or other Ford on this forum, BE SURE to tell us what it is, what year, engine, etc so we have enough information to go on.