| ||
Visit MustangSteve's web site to view some of my work and find details for: FYIFORD Contributors' PICTURES - Power Brake Retrofit Kits for 65-66 Stangs - Classic Mustang FAQ's by MustangSteve - How to wire in a Duraspark Ignition - Mustang Ride Height Pictures and Descriptions - Steel Bushings to fit Granada Spindles to Mustang Tie Rods - Visit my EBAY store MustangSteve Performance - How to Install Granada Disc Brakes MustangSteve's Disc Brake Swap Page - FYIFORD Acronyms for guide to all the acronyms used on this page - FYIFORD Important information and upcoming events |
Offline
Tubo I was able to use the hoses on the ac that were already on. I'm going to get new hoses from the firewall with 90's and route them thru the wheelwell. U'r right about the belt squeal from the alt. It's not the electrical load but rather spinning up the mass of the rotor. Gonna put a idler pulley twixt the alt and ac comp.
6sally6 The cam is the mildest thumper cam from comp cam. Specs - 107 lobe seperation, .531 lift intake, .515 exhaust, duration at .050 intake 227 exhaust 241, 79 degrees of overlap. Sounds better live than it did in the video. Won't drive in gear below 2000 rpm without jerking. I do get to use first gear now(never could before comfortably) with the 3.73 rear gear. Still puts a big ol smile on my face when she gets going.
REMEMBER!!! When posting a question about your Mustang or other Ford on this forum, BE SURE to tell us what it is, what year, engine, etc so we have enough information to go on. |