FYI FORD - MustangSteve's Ford Mustang Forum
The Internet's Most Knowledgeable Classic Mustang Information
IF YOU HAVE A QUESTION ABOUT CLASSIC FORD MUSTANGS, YOU HAVE COME TO THE RIGHT PLACE!
MustangSteve has over 30 years of Mustang experience, having owned 30 of them and restored several others. With the help of other Mustangers, this site is dedicated to helping anyone wanting to restore or modify their Mustang.... THERE ARE NO DUMB QUESTIONS!!!!!
Visit MustangSteve's web site to view some of my work and find details for:
FYIFORD Contributors' PICTURES - Power Brake Retrofit Kits for 65-66 Stangs - Classic Mustang FAQ's by MustangSteve - How to wire in a Duraspark Ignition - Mustang Ride Height Pictures and Descriptions - Steel Bushings to fit Granada Spindles to Mustang Tie Rods - Visit my EBAY store MustangSteve Performance - How to Install Granada Disc Brakes MustangSteve's Disc Brake Swap Page - FYIFORD Acronyms for guide to all the acronyms used on this page - FYIFORD Important information and upcoming events

You are not logged in. Would you like to login or register?

  • Index
  •  » FYI Ford, Classic Mustang Tech Discussion
  •  » wheel studs for cobra brake conversion

    • 1 of 1

       

    10/19/2013 10:14 AM  #1

    cougrnut
    FYI Addict

    Offline

    From: hershey
    Registered: 4/03/2013
    Posts: 194

    wheel studs for cobra brake conversion

    I remember reading that the dorman wheel studs #610-441 work well for installing in drum hubs for the cobra brake conversion.  Problem I have is that they are hardt to find and expensive around here. Is there another stud that is a little more common and about the same length that will work as well as these? Thanks for any help.

     

    10/19/2013 10:18 AM  #2

    MS
    Forum Originator

    Offline

    From: Canyon Lake, Texas
    Registered: 1/24/2013
    Posts: 12,762

    Re: wheel studs for cobra brake conversion

    610-368 is a little shorter than those but work great.  I always keep about 50 in stock...

    Money you enjoy wasting is NOT wasted money... unless your wife finds out.
     

    10/19/2013 2:41 PM  #3

    McStang
    I FYI 24-7

    Offline

    From: Benicia, CA
    Registered: 4/01/2013
    Posts: 502

    Re: wheel studs for cobra brake conversion

    MustangSteve wrote:

    610-368 is a little shorter than those but work great.  I always keep about 50 in stock...

    Autozone sells these for about $2 a pop - cheapest price I found.

    (Pinto!)
     

    10/19/2013 10:42 PM  #4

    Hornman
    Senior 24-7 FYI Addict

    Offline

    From: Mansfield, Texas
    Registered: 4/01/2013
    Posts: 1,568

    Re: wheel studs for cobra brake conversion

    McStang wrote:

    MustangSteve wrote:

    610-368 is a little shorter than those but work great.  I always keep about 50 in stock...

    Autozone sells these for about $2 a pop - cheapest price I found.

     
    Rockauto sells them for $1.13 ea.

     

     

    1 of 1

  • Index
  •  » FYI Ford, Classic Mustang Tech Discussion
  •  »  wheel studs for cobra brake conversion

    • Board footera


    REMEMBER!!! When posting a question about your Mustang or other Ford on this forum, BE SURE to tell us what it is, what year, engine, etc so we have enough information to go on.