FYI FORD - MustangSteve's Ford Mustang Forum
The Internet's Most Knowledgeable Classic Mustang Information
IF YOU HAVE A QUESTION ABOUT CLASSIC FORD MUSTANGS, YOU HAVE COME TO THE RIGHT PLACE!
MustangSteve has over 30 years of Mustang experience, having owned 30 of them and restored several others. With the help of other Mustangers, this site is dedicated to helping anyone wanting to restore or modify their Mustang.... THERE ARE NO DUMB QUESTIONS!!!!!
Visit MustangSteve's web site to view some of my work and find details for:
FYIFORD Contributors' PICTURES - Power Brake Retrofit Kits for 65-66 Stangs - Classic Mustang FAQ's by MustangSteve - How to wire in a Duraspark Ignition - Mustang Ride Height Pictures and Descriptions - Steel Bushings to fit Granada Spindles to Mustang Tie Rods - Visit my EBAY store MustangSteve Performance - How to Install Granada Disc Brakes MustangSteve's Disc Brake Swap Page - FYIFORD Acronyms for guide to all the acronyms used on this page - FYIFORD Important information and upcoming events

You are not logged in. Would you like to login or register?

  • Index
  •  » FYI Ford, Classic Mustang Tech Discussion
  •  » Anybody got a few Coil Spring perches they dont need

    • 1 of 1

       

    1/26/2022 2:30 PM  #1

    BILLY WALTON from GEORGIA
    Carrollton, GA Bash Host

    Offline

    From: CARROLLTON GEORGIA
    Registered: 4/14/2013
    Posts: 2,431

    Anybody got a few Coil Spring perches they dont need

    I need a couple to build some roller perches out of. I still have one it appears to be good but I ordered the bearing kit from Daze and thought I had a couple laying around but cant find them. message me and let me know what you have.

    Its really me....I fixed my caps lock .
     

    1/26/2022 8:35 PM  #2

    lowercasesteve
    Senior 24-7 FYI Addict

    Offline

    From: Auburn, Ca
    Registered: 4/01/2013
    Posts: 1,253

    Re: Anybody got a few Coil Spring perches they dont need

    BILLY WALTON from GEORGIA wrote:

    I need a couple to build some roller perches out of. I still have one it appears to be good but I ordered the bearing kit from Daze and thought I had a couple laying around but cant find them. message me and let me know what you have.

    I bought mine from Daze a few years back.  They were cheap as I recall.  I just sent him mine as a core.  He returned them very soon.  I do not weld, but, even if I did, it was not worthwhile for me to do it myself.  Think about it.  Mine still works perfectly and has been for more than a decade.
     

    Original owner - 351w,T-5, 4whl disks, power R&P
     

    1/26/2022 8:47 PM  #3

    BILLY WALTON from GEORGIA
    Carrollton, GA Bash Host

    Offline

    From: CARROLLTON GEORGIA
    Registered: 4/14/2013
    Posts: 2,431

    Re: Anybody got a few Coil Spring perches they dont need

    Daze is sending me some...thats what I had on my 66

    Its really me....I fixed my caps lock .
       •Thread Starter
     

     

    1 of 1

  • Index
  •  » FYI Ford, Classic Mustang Tech Discussion
  •  »  Anybody got a few Coil Spring perches they dont need

    • Board footera


    REMEMBER!!! When posting a question about your Mustang or other Ford on this forum, BE SURE to tell us what it is, what year, engine, etc so we have enough information to go on.