FYI FORD - MustangSteve's Ford Mustang Forum
The Internet's Most Knowledgeable Classic Mustang Information
IF YOU HAVE A QUESTION ABOUT CLASSIC FORD MUSTANGS, YOU HAVE COME TO THE RIGHT PLACE!
MustangSteve has over 30 years of Mustang experience, having owned 30 of them and restored several others. With the help of other Mustangers, this site is dedicated to helping anyone wanting to restore or modify their Mustang.... THERE ARE NO DUMB QUESTIONS!!!!!
Visit MustangSteve's web site to view some of my work and find details for:
FYIFORD Contributors' PICTURES - Power Brake Retrofit Kits for 65-66 Stangs - Classic Mustang FAQ's by MustangSteve - How to wire in a Duraspark Ignition - Mustang Ride Height Pictures and Descriptions - Steel Bushings to fit Granada Spindles to Mustang Tie Rods - Visit my EBAY store MustangSteve Performance - How to Install Granada Disc Brakes MustangSteve's Disc Brake Swap Page - FYIFORD Acronyms for guide to all the acronyms used on this page - FYIFORD Important information and upcoming events

You are not logged in. Would you like to login or register?

  • Index
  •  » FYI Ford, Classic Mustang Tech Discussion
  •  » Interiors

    • 1 of 1

       

    1/11/2022 7:31 PM  #1

    riwall
    FYI Addict

    Offline

    From: Sherman, Texas
    Registered: 4/02/2013
    Posts: 223

    Interiors

    OK, so I finally decided that I need to spend a few bucks on the interior of my '67 Coupe - carpet, upholstery for the buckets, maybe gauges, etc. The first need is upholstery for the buckets. I really like the TMI Sport II seat upholstery because of the extra "bolstering". Looks sharp. Well, I tried to place an order and was advised that it will be 3-4 months before they are shipped. Not acceptable. I have not been able to find any similar products. Do I really have to wait 3-4 months or are there any other options? My Coupe has blue interior with the 2 tone blue seats and it is important to me to keep the same theme. Any suggestions?

     

    1/11/2022 8:11 PM  #2

    lowercasesteve
    Senior 24-7 FYI Addict

    Offline

    From: Auburn, Ca
    Registered: 4/01/2013
    Posts: 1,253

    Re: Interiors

    How about a good auto interior shop?  We have several here.  Maybe more expensive, but they are more available.  They might have what you need in stock and don't have to wait for the boat from China to be unloaded.

    Original owner - 351w,T-5, 4whl disks, power R&P
     

    1/11/2022 8:51 PM  #3

    Rufus68
    I FYI 24-7

    Offline

    From: Knoxville, TN
    Registered: 4/26/2017
    Posts: 889

    Re: Interiors

    I put the TMI Sport foam and upholstery in my '68 back in 2014.  While I like the raised sides of the seats, I did not expect the foam under the thighs to be raised.  This pushes the legs towards the steering wheel.  I found that a 13 inch steering wheel lands in the view of the instruments.  Anything close to a 15 inch steering wheel gives a good view of the instruments but hits the legs.  I finally found a 14 inch steering wheel that is a best compromise; however, had I realized this I would have opted for the standard seat foam and upholstery.
    .
    I'm still running the sport seat upholstery and 14 inch steering wheel since this combination is working fine for me.
     

    1968 T-code Coupe with a 302.  Nice car, no show stopper for sure, but I like it.
     

    1/12/2022 1:20 AM  #4

    Muzz 66
    I FYI 24-7

    Offline

    From: Madera, California
    Registered: 4/01/2013
    Posts: 416

    Re: Interiors

    That 3-4 month wait with TMI isn’t a new problem.  I balked at ordering a couple years ago when they said the same thing.  Wish I hadn’t.

    '66 Fastback since July 27, 1981. Springtime Yellow, originally a 200 cu in, 4 speed. Also a '92 LX Coupe, 5.0, 5 speed.
     

    1/12/2022 9:50 AM  #5

    TimC
    I FYI 24-7

    Offline

    From: Wheaton, Illinois
    Registered: 4/01/2013
    Posts: 876

    Re: Interiors

    Another suggestion still involves a probable TMI delay, but I know that both Bullet Bob and terry (and probably many others) ordered TMI seat covers for 91ish Fox sport seats with the 65/66 pony look.  With the correct choice of seat covers, the fox seats look right at home in the early cars, in my opinion. I believe the fox seats provide the added comfort and avoid the leg to wheel clearance issues that Rufus68 refers to.

     

    1/12/2022 12:38 PM  #6

    TKOPerformance
    Hyper FYIFORD ADDICT

    Online!

    From: Newark, DE
    Registered: 12/15/2014
    Posts: 7,496

    Re: Interiors

    All the TMI stuff I believe is made to order.  Even before the recent insanity with shipping, delays, etc. it took a decent amount of time to get.  I waited probably 3 months for my TMI front seats.  I'm VERY glad I did.  I really like the seats.  They are very comfortable, look correct in the car, and have held up very well after several years of use.  I couldn't imagine taking a long road trip in the stock seats, but with the TMI seats I look forward to them. 

     

    1/12/2022 12:44 PM  #7

    rpm
    Senior 24-7 FYI Addict

    Offline

    From: Bakersfield, Ca
    Registered: 9/17/2013
    Posts: 3,653

    Re: Interiors

    TKOPerformance wrote:

    I couldn't imagine taking a long road trip in the stock seats, but with the TMI seats I look forward to them. 

    Does this statement mean you'll be attending the Bash in Alabama this year?

    Bob. 69 Mach 1, 393W, SMOD Toploader, Armstrong  steering, factory AC.
     

    1/12/2022 1:06 PM  #8

    Bolted to Floor
    Senior 24-7 FYI Addict

    Offline

    From: Houston, Texas
    Registered: 4/01/2013
    Posts: 2,016

    Re: Interiors

    I had a 9 week delivery time when I ordered the 66 parchment color for 07 seats. They arived on time. If it's what you want, make the order and be prepared to wait. 

    Last edited by Bolted to Floor (1/12/2022 1:06 PM)

    John  -- 67 Mustang Coupe 390 5 speed
     

    1/12/2022 3:22 PM  #9

    TKOPerformance
    Hyper FYIFORD ADDICT

    Online!

    From: Newark, DE
    Registered: 12/15/2014
    Posts: 7,496

    Re: Interiors

    Bearing Bob wrote:

    TKOPerformance wrote:

    I couldn't imagine taking a long road trip in the stock seats, but with the TMI seats I look forward to them. 

    Does this statement mean you'll be attending the Bash in Alabama this year?

    Strong possibility, but I wouldn't be able to drive there if I do.  I'd just lose too much time in travel.
     

     

    1/12/2022 7:15 PM  #10

    riwall
    FYI Addict

    Offline

    From: Sherman, Texas
    Registered: 4/02/2013
    Posts: 223

    Re: Interiors

    OK, talked me into it. I'll order the seat upholstery I want tonight. Hate waiting but it is what it is. 

       •Thread Starter
     

    1/12/2022 8:24 PM  #11

    Bullet Bob
    Senior 24-7 FYI Addict

    Offline

    From: Montrose, Colorado
    Registered: 4/01/2013
    Posts: 4,887

    Re: Interiors

    riwall wrote:

    OK, talked me into it. I'll order the seat upholstery I want tonight. Hate waiting but it is what it is. 

    What TimC said.  I put TMI "66 Pony" on 87 Fox seats back in 06 or 07 and they are still perfect.  If there is any question I would also recommend you pop for new foam...or is that automatic with the Sport Seats?
    I know you hate the wait but I gotta ax...how long have you been making do with what's in it?  Yeah, yeah...I know.   Me too.

    BB1

    "you get what you pay for, good work isn't cheap, and there are NO free lunches...PERIOD!"
     

    1/13/2022 7:53 PM  #12

    riwall
    FYI Addict

    Offline

    From: Sherman, Texas
    Registered: 4/02/2013
    Posts: 223

    Re: Interiors

    Of course, you are correct BB. I have endured these crappy seats for maybe 15 years. The foam is extra but I will order that in a couple of months as there is no waiting period. I am now advised that it may be 18 weeks before I get the upholstery. Being well into my senior years my fear is ------. Well, lets not go there. 
    Anyway, it was 70 F today and I took the 'stang out for a long run. Lots of thumbs up. Made my day!

       •Thread Starter
     

    3/08/2022 7:58 PM  #13

    riwall
    FYI Addict

    Offline

    From: Sherman, Texas
    Registered: 4/02/2013
    Posts: 223

    Re: Interiors

    I complained about the 18-week wait for my TMI upholstery but was talked into going ahead with the order. So, in early January I did. Well, I just received email notification that my stuff has been shipped! I am ecstatic! Thank you for talking me into doing this, Can't wait! 

       •Thread Starter
     

    3/09/2022 9:22 AM  #14

    wsinsle
    Senior 24-7 FYI Addict

    Offline

    From: Belle Vernon, PA
    Registered: 4/01/2013
    Posts: 1,703

    Re: Interiors

    Now waiting for the pics, hope it ain't a 18 week lead time! LOL

    If this forum can't fix it, it isn't broke.
     

    3/09/2022 9:25 AM  #15

    Steve69
    Senior 24-7 FYI Addict

    Offline

    From: Madison Wisconsin
    Registered: 4/01/2013
    Posts: 2,736

    Re: Interiors

    Rufus68 wrote:

    I put the TMI Sport foam and upholstery in my '68 back in 2014.  While I like the raised sides of the seats, I did not expect the foam under the thighs to be raised.  This pushes the legs towards the steering wheel.  I found that a 13 inch steering wheel lands in the view of the instruments.  Anything close to a 15 inch steering wheel gives a good view of the instruments but hits the legs.  I finally found a 14 inch steering wheel that is a best compromise; however, had I realized this I would have opted for the standard seat foam and upholstery.
    .
    I'm still running the sport seat upholstery and 14 inch steering wheel since this combination is working fine for me.
     

       Had the same issue after installing mine.  My head was hitting the ceiling and my gut was hitting the wheel...LOL   I removed the seat adjusters and bolted the seats to the floor. 
     

     

    3/09/2022 12:20 PM  #16

    Rudi
    Senior 24-7 FYI Addict

    Offline

    From: Stuck in the 50's Welland Ca
    Registered: 4/01/2013
    Posts: 3,974

    Re: Interiors

    riwall wrote:

    I complained about the 18-week wait for my TMI upholstery but was talked into going ahead with the order. So, in early January I did. Well, I just received email notification that my stuff has been shipped! I am ecstatic! Thank you for talking me into doing this, Can't wait! 

     
    Lots of how too’s on line.
    Get a quality hog ring plier, the cheap ones will be hard on the hands, I like the offset ones. A small 8” bolt cutter is better than plain wire cutters. Grab a 500 count bag of hog rings.
    Use heavy coat hangers for listing wires. Use hardware store burlap between the buns and seat frames, much cheaper than the same stuff from Mustang places.
    Extra padding if needed can be had at dry goods stores. Get a bunch of those thin plastic clothes bags from dry cleaner places, pulling them over the seat back before putting the cover on, they make the cover slide real good over the foam.
    Lay the covers out in the hot Texas sun to soften them up before you install them.
    A heat gun can be carefully used to work out wrinkles.
    When I did my 68 seats it took a couple of try’s on the first seat before I got the hang of it. Don’t be hesitant to undo the cover if it doesn’t look right, just cut the hog rings, make the necessary adjustments and have at it again.
    That’s about all I got for now, I’m sure you will do a great job, good luck.

    Last edited by Rudi (3/09/2022 12:22 PM)

    Good work ain't cheap, Cheap work ain't good!   Simple Man
     

     

    1 of 1

  • Index
  •  » FYI Ford, Classic Mustang Tech Discussion
  •  »  Interiors

    • Board footera


    REMEMBER!!! When posting a question about your Mustang or other Ford on this forum, BE SURE to tell us what it is, what year, engine, etc so we have enough information to go on.