FYI FORD - MustangSteve's Ford Mustang Forum
The Internet's Most Knowledgeable Classic Mustang Information
IF YOU HAVE A QUESTION ABOUT CLASSIC FORD MUSTANGS, YOU HAVE COME TO THE RIGHT PLACE!
MustangSteve has over 30 years of Mustang experience, having owned 30 of them and restored several others. With the help of other Mustangers, this site is dedicated to helping anyone wanting to restore or modify their Mustang.... THERE ARE NO DUMB QUESTIONS!!!!!
Visit MustangSteve's web site to view some of my work and find details for:
FYIFORD Contributors' PICTURES - Power Brake Retrofit Kits for 65-66 Stangs - Classic Mustang FAQ's by MustangSteve - How to wire in a Duraspark Ignition - Mustang Ride Height Pictures and Descriptions - Steel Bushings to fit Granada Spindles to Mustang Tie Rods - Visit my EBAY store MustangSteve Performance - How to Install Granada Disc Brakes MustangSteve's Disc Brake Swap Page - FYIFORD Acronyms for guide to all the acronyms used on this page - FYIFORD Important information and upcoming events

You are not logged in. Would you like to login or register?

  • Index
  •  » FYI Ford, Classic Mustang Tech Discussion
  •  » Buyer beware

    • 1 of 1

       

    6/17/2022 5:27 PM  #1

    MS
    Forum Originator

    Offline

    From: Canyon Lake, Texas
    Registered: 1/24/2013
    Posts: 12,250

    Buyer beware

    I have been waiting for the Dennis Carpenter 1970 24” fan shrouds to come available again for over a year.

    NPD finally got some, so I ordered enthusiastically.   

    It came, and is not even close to the original 70 shroud I have had in my 66 for over 20 years.

    So, if you need one, and you want it to fit and look like an original, don’t get your hopes up.

    It does not have the same shape as original and has a huge 1” gap at the top for about 1/2 to 3/4 of the width of the core.

    If you don’t give a rip about how it looks or fits, this is the shroud for you.

    This is the shroud for 70 Mustang with 24” radiator and 302, 351w, 351c with AC or Boss 302

    Money you enjoy wasting is NOT wasted money... unless your wife finds out.
     

    6/17/2022 5:37 PM  #2

    rpm
    Senior 24-7 FYI Addict

    Offline

    From: Bakersfield, Ca
    Registered: 9/17/2013
    Posts: 3,651

    Re: Buyer beware

    Well that certainly sucks. His stuff is usually really good. I know he has the best repop 69 hood lip molding.

    Bob. 69 Mach 1, 393W, SMOD Toploader, Armstrong  steering, factory AC.
     

    6/17/2022 6:45 PM  #3

    josh-kebob
    Senior 24-7 FYI Addict

    Offline

    From: Madison, AL
    Registered: 4/06/2013
    Posts: 2,902

    Re: Buyer beware

    When they were in stock,  a la pre-covid, I purchased mine from CJPony....original ford tooling...should've purchased two...I could have made a handsome profit off a TX guy....lol

     

    6/17/2022 8:24 PM  #4

    MS
    Forum Originator

    Offline

    From: Canyon Lake, Texas
    Registered: 1/24/2013
    Posts: 12,250

    Re: Buyer beware

    Money you enjoy wasting is NOT wasted money... unless your wife finds out.
       •Thread Starter
     

     

    1 of 1

  • Index
  •  » FYI Ford, Classic Mustang Tech Discussion
  •  »  Buyer beware

    • Board footera


    REMEMBER!!! When posting a question about your Mustang or other Ford on this forum, BE SURE to tell us what it is, what year, engine, etc so we have enough information to go on.