FYI FORD - MustangSteve's Ford Mustang Forum
The Internet's Most Knowledgeable Classic Mustang Information
IF YOU HAVE A QUESTION ABOUT CLASSIC FORD MUSTANGS, YOU HAVE COME TO THE RIGHT PLACE!
MustangSteve has over 30 years of Mustang experience, having owned 30 of them and restored several others. With the help of other Mustangers, this site is dedicated to helping anyone wanting to restore or modify their Mustang.... THERE ARE NO DUMB QUESTIONS!!!!!
Visit MustangSteve's web site to view some of my work and find details for:
FYIFORD Contributors' PICTURES - Power Brake Retrofit Kits for 65-66 Stangs - Classic Mustang FAQ's by MustangSteve - How to wire in a Duraspark Ignition - Mustang Ride Height Pictures and Descriptions - Steel Bushings to fit Granada Spindles to Mustang Tie Rods - Visit my EBAY store MustangSteve Performance - How to Install Granada Disc Brakes MustangSteve's Disc Brake Swap Page - FYIFORD Acronyms for guide to all the acronyms used on this page - FYIFORD Important information and upcoming events

You are not logged in. Would you like to login or register?

  • Index
  •  » FYI Ford, Classic Mustang Tech Discussion
  •  » Hey Rich..........Red351 what was that Hi Po PCV you mentioned...

    • 1 of 1

       

    8/13/2022 5:38 PM  #1

    6sally6
    Hyper FYIFORD ADDICT

    Offline

    From: Surfside Beach,SC
    Registered: 4/02/2013
    Posts: 6,852

    Hey Rich..........Red351 what was that Hi Po PCV you mentioned...

    I didn't write down the number and now..........I wish I did!
    Thanx
    6s6

    Get busy Liv'in or get busy Die'n....Host of the 2020 Bash at the Beach/The only Bash that got cancelled  )8
     

    8/13/2022 9:24 PM  #2

    Nos681
    Senior 24-7 FYI Addict

    Offline

    From: Atlantic Mine, Michigan
    Registered: 7/14/2016
    Posts: 3,329

    Re: Hey Rich..........Red351 what was that Hi Po PCV you mentioned...

    quote=6sally6]Fram 2377 PVC.........................good info!!
    6s6[/quote😁

    This was the fixed orifice Chris mentioned not Rich.

    Last edited by Nos681 (8/13/2022 10:12 PM)

     

    8/13/2022 10:29 PM  #3

    Raymond_B
    Senior 24-7 FYI Addict

    Offline

    From: Fort Worth, TX
    Registered: 4/01/2013
    Posts: 1,203

    Re: Hey Rich..........Red351 what was that Hi Po PCV you mentioned...

    I think it's this one http://mewagner.com/

     

    8/13/2022 10:31 PM  #4

    HudginJ3
    Senior 24-7 FYI Addict

    Offline

    From: Cedar Hill, TX
    Registered: 4/29/2015
    Posts: 1,249

    Re: Hey Rich..........Red351 what was that Hi Po PCV you mentioned...

    Yuuuuup it’s that one

    70, ragtop 351W/416 stroker Edel Performer heads w pro flow 4, Comp roller 35-421-8. T5
     

    8/14/2022 9:11 AM  #5

    red351
    I FYI 24-7

    Offline

    From: Carlisle, PA
    Registered: 5/31/2018
    Posts: 445

    Re: Hey Rich..........Red351 what was that Hi Po PCV you mentioned...

    Haven't been in the garage much this year, but Fram listed 2 for B302 and the hi po. I just don't remember the #.  I bought 3 of each and with the vac gauge they all had a little different idle vac. 

     

    8/14/2022 5:32 PM  #6

    6sally6
    Hyper FYIFORD ADDICT

    Offline

    From: Surfside Beach,SC
    Registered: 4/02/2013
    Posts: 6,852

    Re: Hey Rich..........Red351 what was that Hi Po PCV you mentioned...

    Welp (thx RPM)......I was just pointing out to Chris that ....."all" PVC's    are not equal.
    Most of us just look up one for a 302 and go with it............. WORNG!!!
    anywho...........
    6sal6

    Get busy Liv'in or get busy Die'n....Host of the 2020 Bash at the Beach/The only Bash that got cancelled  )8
       •Thread Starter
     

     

    1 of 1

  • Index
  •  » FYI Ford, Classic Mustang Tech Discussion
  •  »  Hey Rich..........Red351 what was that Hi Po PCV you mentioned...

    • Board footera


    REMEMBER!!! When posting a question about your Mustang or other Ford on this forum, BE SURE to tell us what it is, what year, engine, etc so we have enough information to go on.