| ||
Visit MustangSteve's web site to view some of my work and find details for: FYIFORD Contributors' PICTURES - Power Brake Retrofit Kits for 65-66 Stangs - Classic Mustang FAQ's by MustangSteve - How to wire in a Duraspark Ignition - Mustang Ride Height Pictures and Descriptions - Steel Bushings to fit Granada Spindles to Mustang Tie Rods - Visit my EBAY store MustangSteve Performance - How to Install Granada Disc Brakes MustangSteve's Disc Brake Swap Page - FYIFORD Acronyms for guide to all the acronyms used on this page - FYIFORD Important information and upcoming events |
1 of 1
Offline
Looking to see what all I need . I know the center drag link and maybe the tierod ends.
Offline
I haven’t done it…had considered it in past.
The driver side inner/outer/sleeve and center link and possibly the idler arm. I’ve been told that I have manual idler arm on my factory power steering.
The power steering is 3/4” on driver side.
Manual has 11/16” both sides.
Offline
Not sure this is a help but I had switched the PS on my 65 to manual steering before I switched to the MII front end. I had removed the manual steering from a 66 donor car, and replaced everything except the steering box. The PS steering had a quicker ratio (16:1 vs. 19:1, as I remember) and that, coupled with 225/60 tires, only made parallel parking a chore.
1 of 1
REMEMBER!!! When posting a question about your Mustang or other Ford on this forum, BE SURE to tell us what it is, what year, engine, etc so we have enough information to go on. |