BILLY WALTON from GEORGIA wrote:

TremendousWand wrote:

I'm looking for the seal/gasket/moulding that goes around the vent window glass.  Not the weather stripping.



anyone know what this is called or where I can find it?  My searches just keep returning the weather stripping or the entire sub assembly.

thank you

.

https://www.classicindustries.com/product/all-years/ford/mustang/parts/21448AB.html?gclid=EAIaIQobChMInPGR2JHs-QIV6CdMCh10hAR3EAQYAiABEgJAYfD_BwE&gclsrc=aw.ds

 

No that's the weather stripping.  That's what the glass frame goes into.  Apparently it's like a sealing role of some material.  This looks like it's molded but from a video I saw it's not.  You just roll on the stuff and cut to size.

MS wrote:

TremendousWand wrote:

BILLY WALTON from GEORGIA wrote:

.

https://www.classicindustries.com/product/all-years/ford/mustang/parts/21448AB.html?gclid=EAIaIQobChMInPGR2JHs-QIV6CdMCh10hAR3EAQYAiABEgJAYfD_BwE&gclsrc=aw.ds

 

No that's the weather stripping.  That's what the glass frame goes into.  Apparently it's like a sealing role of some material.  This looks like it's molded but from a video I saw it's not.  You just roll on the stuff and cut to size.

Is what you have in your picture what you are looking for? That is exactly what BILLY’s link goes to…???

NO!  That' doesn't hold the glass, that holds the glass frame.
https://www.npdlink.com/product/glass-frame-vent-window-rh/103782?backurl=search%2Fproducts%3Fsearch_terms%3Dvent%252Bwindow%26top_parent%3D200001%26year%3D1966&year=1966

What hold the glass in the glass frame is a role of the seal stuff:
https://www.npdlink.com/product/seal-strip-glass-channel-116-inch-thick/141849?backurl=search%2Fproducts%3Fsearch_terms%3Dglass%252Bseal%252B1%25252F4%26top_parent%3D200001%26year%3D1966&year=1966

I thought it was molded because what I pulled off was so rigid and seemed formed fit.  It turns out you just use this seal role stuff and cut to fit.  Here's the video I found:

https://www.youtube.com/watch?v=3Pzo3VbCf6E&t=870s

 

Bullet Bob wrote:

Hey Wand....I think I have some glasing tape left over from resetting all the windows on the Heap.  If I can find it I'll gladly send you enough to do the job.  As I recall it was 4/64"  but it's been a while.  Let me know if you want it.

Thanks but I think I'm good.  I ordered a couple of rolls which should have me covered.  Going to spend the week cleaning and polishing all the vent window parts.